Atomfair-ACDU-7319 Automatic Coating Dryer
Product Overview
This equipment is widely used in various high-temperature coating research fields, suitable for the coating and drying of ceramic films, crystal films, 18650 battery material films and special nano-films. It can meet the technological development needs of future high-temperature film-forming processes with strong adaptability.
Functional Features
- Coating speed can be freely adjusted within the range of 0-100mm/s to meet the speed requirements of different coating processes.
- Equipped with a digital display temperature-controlled drying system, with intuitive and accurate temperature control, and the maximum working temperature can reach 150℃.
- The stroke can be flexibly adjusted between 10~800mm through the travel switch, suitable for coating substrates of different sizes.
- Equipped with a vacuum aluminum flat plate for quick placement and removal of substrates with convenient operation; equipped with an adjustable coater to meet diverse coating needs.
Technical Parameters
| Item | Specification |
|---|---|
| Coating Speed | 0-100mm/s |
| Maximum Stroke | 800mm |
| Vacuum Plate | With vacuum aluminum flat plate |
| Vacuum Plate Size | 865mm(L)×200mm(W)×30mm(H) |
| Scraper Adjustable Range | 0.01-3.5mm |
| Heating and Drying System | Room temperature ~ 150℃, digital display temperature controller, accuracy ±1℃ |
| Power Supply | 220V/50HZ |
| Weight | 100KG |
| Overall Dimension | 900mm(L)×310mm(W)×930mm(H) |
If you’re interested, have any questions, or have specific customization requirements, please feel free to contact us at inquiry@atomfair.com.
This equipment operates with a heated drying system and a powered coating mechanism, presenting burn and mechanical entanglement hazards. Safe operation requires strict adherence to temperature limits and moving-part safeguards.
- Thermal Safety Constraint: Operate only within the maximum working temperature of 150°C to prevent overheating and equipment damage.
- Mechanical Hazard Constraint: Keep hands and loose clothing clear of the moving coating head and vacuum plate during operation to avoid injury.
- Electrical Safety Constraint: Ensure the power supply matches the 220V/50HZ requirement and that the unit is properly grounded before connection.
This procedure covers the safe setup, operation, and shutdown of the automatic coating dryer for reproducible film coating. Follow each step in sequence to ensure proper handling and to avoid equipment or material damage.
Required Equipment: Adjustable coater with scraper, Vacuum aluminum flat plate, Digital display temperature controller
- Prepare the substrate
Place the coating substrate onto the vacuum aluminum flat plate, ensuring it is centered and securely held by the vacuum. - Set the coating parameters
Adjust the coating speed to the desired value within 0-100mm/s and set the scraper gap between 0.01-3.5mm using the digital controls. - Configure the drying temperature
Set the drying temperature on the digital controller to the required level, not exceeding 150°C, and allow the system to reach the set point. - Apply the coating
Initiate the coating process, allowing the applicator to traverse the substrate at the set speed and stroke length. - Dry the coated film
Allow the coated substrate to remain on the heated plate until the film is fully dried, then remove it using appropriate heat-resistant gloves. - Shut down the equipment
Turn off the heating system and the main power, then clean the scraper and vacuum plate to remove any residual coating material.
What is the maximum coating speed and stroke range of the Atomfair-ACDU-7319 Automatic Coating Dryer?
The coating speed is adjustable from 0 to 100 mm/s, and the stroke can be flexibly set between 10 and 800 mm via the travel switch. This allows adaptation to different substrate sizes and coating process speeds.
What is the maximum working temperature and temperature control accuracy of the drying system?
The heating and drying system operates from room temperature up to 150°C, with a digital display temperature controller providing accuracy of ±1°C. This ensures precise and reproducible drying conditions for temperature-sensitive coatings.
What are the key specifications of the vacuum plate and scraper on the Atomfair-ACDU-7319?
The vacuum aluminum flat plate measures 865 mm (L) × 200 mm (W) × 30 mm (H), and the scraper gap is adjustable from 0.01 to 3.5 mm. These features enable uniform coating thickness and secure substrate holding during the coating process.
The Atomfair-ACDU-7319 Automatic Coating Dryer integrates a 0-100 mm/s adjustable coating speed with a vacuum aluminum flat plate and a digital temperature controller (up to 150°C, ±1°C accuracy), enabling reproducible high-temperature film formation for ceramic, crystal, and battery material research. Its 800 mm stroke and 0.01-3.5 mm scraper range provide flexibility for varied substrate sizes and wet film thicknesses, though the 100 kg mass and 220V/50Hz power requirement demand dedicated lab infrastructure.
Positive
- Wide coating speed and stroke range: Coating speed is adjustable from 0-100 mm/s and stroke from 10-800 mm, accommodating diverse substrate sizes and process speeds for high-temperature film research.
- Precise heating with vacuum plate: Digital temperature control from room temperature to 150°C with ±1°C accuracy, combined with a vacuum aluminum flat plate, ensures uniform drying and stable substrate positioning during coating.
Trade-offs
- Requires 220V/50Hz power supply: The system operates on 220V/50Hz, which may not be compatible with standard lab outlets in regions using other voltages or frequencies, necessitating a dedicated power source or transformer.
- Heavy and bulky footprint: At 100 kg and 900×310×930 mm, the unit requires a sturdy bench and adequate floor space, which may constrain installation in smaller or shared laboratories.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
