ATOMFAIR® PEEK SOLID-STATE BATTERY MOLD

RESEARCH GRADE MATERIAL

Product Overview

General Cylindrical Mold: A common pressure-forming mold used in laboratories, fully customizable to user requirements. The Pressure-Controllable Battery Mold features a sleeve and gasket compression nut made of PEEK material with high mechanical strength and corrosion resistance. It features simple operation, can form a detachable solid-state battery measurement device with a pressure-controllable battery fixture, and is used with small mechanical or manual pressurization devices. This product is designed to study the performance of battery materials under different pressure conditions for all-solid-state lithium battery testing.

Product Technical Parameters

Item	Specifications
Product Dimensions	Ø70 mm × 94 mm
Metal Frame	Stainless Steel
Electrode Post Material	High-strength die steel (mirror-polished head)
Outer Protective Shell	Imported PEEK
Inner Test Sleeve	Ceramic (standard 10 mm, customizable 5–20 mm, inner hole roughness Ra 0.08)
Application	All-Solid-State Lithium Batteries
Withstand Pressure	0–6 T
Temperature Limit	210 °C

Product Features

Ceramic Sleeve: High temperature resistance, no powder adhesion, easy to clean, durable and stable. Standard 10 mm inner diameter, customizable from 5–20 mm with inner hole roughness Ra 0.08.
Mirror Polished Electrode Head: Smooth polished surface, even force distribution, low adhesion, easy to clean. Made of high-strength die steel for long-term durability.
Sealing Structure: Dual protection with thread + sealing ring, tight and reliable; testing can be performed directly in air without glovebox requirements.
Modular Design: Fast assembly, convenient disassembly, higher operation efficiency. All components can be independently replaced or customized.

Usage & Maintenance Notes

Before each use, wipe the mold surface with cleanroom paper to remove anti-rust oil and avoid affecting test results.
Position the mold at the center of the tablet press; do not exceed the mold’s rated pressure during pressurization.
For viscous metal powders (e.g., aluminum, magnesium, zinc), use an appropriate lubricant to reduce friction during compression.
After use, clean the sample residue from the mold promptly to prevent corrosion. For long-term storage, clean and dry the mold with anhydrous ethanol, apply anti-rust oil, and store in a dry environment.

Application Scenarios

Directly place electrode sheets, separators, and electrolyte into the center of the mold sleeve; no screws are required for operation.
Place the entire assembly into a press for pressurization (presses are available for purchase).
Connect the tabs to a battery analyzer for electrochemical measurements.
High-throughput battery measurement kits can be customized according to customer requirements. Contact inquiry@atomfair.com for custom configurations.

TAILORED SOLUTIONS FOR RESEARCH

Contact our engineering team for technical support or official quotations.

EMAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

Solid-State Battery Molds & Pressing Dies

PEEK Solid-State Battery Mold 0–6 T 210 °C ATOMFAIR®