Description
ATOMFAIR ATP-426 AUTOMATIC PELLET PRESS (0-20 TON)INTELLIGENT LABORATORY COMPACTION HARDWARE
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or customized equipment quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR
|
This press automates the compaction of powder samples into uniform pellets for infrared spectroscopy. The device follows a three-phase cycle of intensification, pressure stabilization, and automatic venting.
Required Equipment: ATOMFAIR ATP-426 Automatic Pellet Press
- Set dwell time
Configure the desired dwell duration between 0 and 999.59 seconds on the LCD interface using the control panel. - Initiate intensification
Initiate the compaction cycle to begin the automated intensification phase. - Hold pressure
Allow the press to automatically sustain the target pressure during the programmed stabilization period. - Complete venting
Wait for the system to finish the regulated venting sequence before opening the press enclosure.
How does the ATP-426's automated three-stage compression cycle improve pellet consistency compared to manual presses?
The ATP-426 executes an intelligent intensification → sustained stabilization → regulated venting sequence that eliminates operator variability, ensuring every pellet experiences identical force ramp and dwell profiles. This yields standardized, flat pellets with uniform mechanical density, stabilizing FTIR baselines across batches. The configurable dwell timer (0-999.59 seconds) further allows optimization for different materials.
What is the maximum die diameter supported by the ATP-426's 140 mm × 155 mm column clearance?
The internal column clearance of 140 mm × 155 mm restricts the outer diameter of die sets to less than 140 mm in one axis and 155 mm in the other. Standard 13 mm FTIR dies fit easily, but larger custom dies must stay within these dimensions; the press is engineered for precise compaction within this envelope.
What bench strength is required to safely install a 95 kg ATP-426 automatic pellet press?
The ATP-426 has a net mass of 95 kg and a footprint of 230 mm × 385 mm, so a benchtop rated for at least 150 kg is recommended to safely accommodate both static weight and dynamic pressing forces. The unit ships in a reinforced wooden crate and includes a calibration report; a stable, level surface is essential for accurate force delivery and to prevent deflection during operation.
The ATP-426 Automatic Pellet Press delivers a calibrated 0-20 ton force range with an automated intensification-stabilization-venting cycle, making it well-suited for routine FTIR sample preparation and powder compaction in analytical labs. Its rigid multi-pillar frame and configurable dwell timer up to 999.59 seconds provide repeatable pellet density, though the 95 kg mass and 140 mm × 155 mm column clearance impose benchtop load and die size constraints.
Positive
- Automated compression cycle for repeatability: The intelligent intensification → stabilization → venting sequence eliminates operator variability, ensuring uniform mechanical density across sample batches for consistent FTIR baselines.
- Configurable dwell timer up to 999.59 s: The digital LCD interface allows precise adjustment of pressure stabilization duration, accommodating diverse material compaction requirements from soft organics to medium-hardness powders.
Trade-offs
- 95 kg benchtop mass requires sturdy support: The 95 kg net weight demands a reinforced laboratory table or bench rated for static loads exceeding 100 kg to prevent structural deflection during operation.
- Limited column clearance restricts die size: The internal column spacing of 140 mm × 155 mm constrains the maximum die dimensions, potentially excluding larger powder metallurgy molds or non-standard tooling without custom adapters.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
