Description
Atomfair NCM811-Li Metal Dry Pouch Cell (1.5Ah) | High Energy Density 5/6 Layers Research Battery
High-Performance Lithium Nickel Cobalt Manganese Oxide Dry Cell for Advanced R&D
Product Overview
This 5/6-layer high-capacity dry pouch cell utilizes Lithium Nickel Cobalt Manganese Oxide (NCM811) as the cathode material paired with a Lithium Metal (Li) anode, achieving a superior nominal capacity of 1.5 Ah. As a standardized “Dry Cell” platform, it is delivered without electrolyte, allowing researchers to evaluate custom formulations within a high-performance, multilayer stacked architecture. With a specific capacity of 220 mAh/g and 3.4 g/cc compaction density, it is optimized for next-generation high energy density battery validation.
Technical Specifications
| Category | Property | Value |
|---|---|---|
| Cell | Capacity | 1.5 Ah |
| Voltage Range | 3V ~ 4.3 V | |
| NP Ratio | – | |
| Separator | 12 um PE + 2 um ceramic | |
| Cathode | Material Type | NCM 811 |
| Active Material Percent | 97.4% | |
| Specific Capacity (mAh/g) | 220 | |
| Compaction Density (g/cc) | 3.4 | |
| Coating Areal Density (mg/cm2) | 24 | |
| Dimensions (mm) | 45.5*64 | |
| Anode | Material Type | Li |
| Thickness Parameter | 20+6+20 um | |
| Specific Capacity (mAh/g) | – | |
| Compaction Density (g/cc) | – | |
| Coating Areal Density (mg/cm2) | – | |
| Dimensions (mm) | 46.5*65 |
TAILORED SOLUTIONS FOR YOUR RESEARCH
Contact our engineering team for technical support, custom dimensions, or official quotations.
