Description
PBM-0.2 MICROCOMPUTER PLANETARY BALL MILL TOUCH SCREEN 90WLABORATORY GRADE EQUIPMENT
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This mill requires a stable, grounded electrical supply and a level, vibration-free mounting surface. Grinding jars must be securely sealed to prevent leakage and ensure safe operation.
- Electrical Safety: Use only the specified voltage and grounded outlet to avoid electrical shock or damage.
- Mechanical Balance: Balance the jars and loads symmetrically to prevent excessive vibration and bearing wear.
- Jar Integrity: Inspect jars and lids for cracks or defects before each use to contain spills and flying debris.
- Speed Limits: Adhere to the maximum rated rotational speed to avoid mechanical overstress or jar ejection.
- Containment: Keep the mill lid closed during operation to confine any accidental sample release.
This procedure outlines the steps to safely initialize and operate the planetary ball mill. Following these steps prevents mechanical failure and ensures user safety.
Required Equipment: Grinding jar with lid and gasket, Grinding balls of appropriate size, Jar clamping wrench
- Inspect equipment
Inspect the mill body, jars, and electrical cord for any visible damage before proceeding. - Load sample and media
Load the sample and grinding balls into the jar, filling no more than two-thirds of its volume. - Seal the jar
Seal the jar tightly with the lid and gasket, then fasten the clamping mechanism securely. - Install jar in mill
Place the jar into the mill socket and confirm it is seated evenly and locked in place. - Close and secure lid
Close the mill lid and verify that the safety interlock is engaged before operation. - Set parameters
Set the desired rotational speed and run time on the intelligent touch control panel. - Start and monitor
Press the start button and monitor the mill for unusual noise, vibration, or odors throughout the cycle.
Given the 90W power rating and 1160 rpm maximum speed, what is the effective grinding limit for hard materials like silicon carbide?
The 90W motor and 1160 rpm speed cap indicate this mill is best suited for soft to medium-hard materials. Hard materials like silicon carbide may require prolonged milling times or higher energy input not achievable with this power level.
Can the Atomfair XQM-0.2 be used for wet grinding or is it limited to dry grinding?
The product name does not specify compatibility with wet grinding. However, many mini planetary ball mills support both dry and wet grinding if appropriate jar and sealing options are used. Confirm jar material and seal integrity for liquid samples.
What safety precautions are necessary for operating the XQM-0.2 at its maximum speed of 1160 rpm?
Safe operation at 1160 rpm requires proper jar clamping and weight balancing. The intelligent touch control likely includes speed ramping and emergency stop. Ensure all jars are securely fastened and no imbalance occurs to prevent excessive vibration.
The Atomfair XQM-0.2 is a compact planetary ball mill with 90W power and adjustable speed up to 1160 rpm, suitable for small-scale laboratory grinding. Its intelligent touch control enables precise operation, while the mini design limits sample capacity and throughput.
Positive
- Adjustable Speed Range 0–1160 rpm: Allows precise control over milling intensity for various material hardness and particle size reduction requirements.
- Intelligent Touch Control Interface: Simplifies operation with programmable settings, enhancing reproducibility and user convenience.
Trade-offs
- Low Power Output (90W): Limits grinding efficiency for hard or dense materials, requiring longer processing times compared to higher-power mills.
- Miniature Sample Capacity: Designed for small batches only, impractical for large-scale or continuous processing operations.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
