FREE SHIPPING with $59 or More. New Customer? Inquire for Major Discount & Free Samples! Online Payments & POs Accepted.

Low Temperature Planetary Ball Mill PBM-16A 3KW

Low Temperature Planetary Ball Mill PBM-16A 3KW

$4,990.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Atomfair PBM-16A low temperature planetary ball mill 3KW, 5-15°C, research grade, 0-670 r/min, 162mm jar ID, for heat-sensitive ceramics. Order now.

SKU: AFMSMQIP800
Category: ,
Tags:
Brands:

Description

PBM-16A LOW TEMP PLANETARY BALL MILL 5–15°C 3KW

LABORATORY GRADE EQUIPMENT

Product Introduction
Low temperature planetary ball mill is a combined equipment of planetary ball mill and refrigeration device. During high-speed grinding, most materials will heat up due to friction or exothermic reactions, which may alter the physical and chemical properties of materials and produce negative grinding effects. Low temperature planetary ball mill is mainly used for material grinding processes requiring strict temperature control. The listed price is for the main machine only; grinding jars and grinding balls must be ordered separately.

Operating Principle of Planetary Ball Mill
Four grinding jars are installed on the main disc of the planetary ball mill. When the motor drives the main disc to rotate, the grinding jars revolve around the main disc axis and rotate simultaneously driven by the planetary mechanism, performing planetary motion. The grinding balls inside the jars rub and collide with each other under high-speed planetary motion, enabling efficient sample grinding and mixing.

Product Application
Low temperature planetary ball mill is widely used in geology, mineral resources, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, environmental protection and other fields. It is suitable for the production of electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganate, catalysts, fluorescent powders, long afterglow luminescent powders, rare earth polishing powders, electronic glass powders, fuel cells, zinc oxide varistors, piezoelectric ceramics, nanomaterials, wafer ceramic capacitors, MLCC, thermistors (PTC, NTC), zinc oxide varistors, dielectric ceramics, alumina ceramics, zirconia ceramics, fluorescent powders, zinc oxide powder, cobalt oxide powder, Ni-Zn ferrites, Mn-Zn ferrites and other products.

Product Features
Low temperature planetary ball mill is a combined equipment of planetary ball mill and air cooling device. The air cooling unit adopts the air-conditioning compression refrigeration principle, and the cold air circulation quickly removes heat generated during grinding. According to ambient temperature differences, the temperature of the grinding chamber can be controlled at 5–15℃. It is mainly used for ultra-fine grinding of materials under low-temperature processes. The air cooling device features simple structure, convenient operation, easy maintenance and low energy consumption.

Technical Parameter Table of Planetary Ball Mill
No. Model Style Grinding Jar Rotation Speed Grinding Jar Holder ID (mm) Motor Power Jar Revolution Diameter (mm) Overall Dimensions (mm) Net Weight (kg)
1 PBM-0.2 Mini Type 0~1160 r/min 50 90W Φ111 420×260×310 25
2 PBM-0.2S Mini Glove Box Type 0~1160 r/min 50 90W Φ111 Unit: 390×220×270
Control Box: 200×180×240		 29
3 PBM-0.4A Half-Round Type 0~870 r/min 80 250W Φ140 530×300×360 34
4 PBM-6 — 0~670 r/min 134 0.75KW Φ234 760×470×580 100
5 PBM-4A Half-Round Type 0~670 r/min 134 0.75KW Φ234 760×470×600 85
6 PBM-(8-12) — 0~580 r/min 162 1.5KW Φ275 900×600×640 168
7 PBM-(8-12)A Half-Round Type 0~580 r/min 162 1.5KW Φ275 880×560×642 150
8 PBM-16A Half-Round Type 0~510 r/min 182 3KW Φ320 950×600×710 205
9 PBM-20 — 0~430 r/min 222 4KW Φ385 1200×790×930 392
10 PBM-40 — 0~390 r/min 250 5.5KW Φ430 1400×880×1070 656
11 PBM-60 — 0~260 (1:1.5) r/min 275 7.5KW Φ490 1600×1070×1250 950
12 PBM-100 — 0~240 (1:1.5) r/min 326 11KW Φ578 1750×1140×1330 1300
13 PBM-200 — 0~215 r/min 460 22KW Φ738 2670×1600×2804 2725

General Technical Parameters
Parameter Specification
Transmission Mode Gear drive
Working Mode Two or four grinding jars working simultaneously
Maximum Loading Capacity (Material + Grinding Balls) Two-thirds of the grinding jar volume
Grinding Jar Volume 5L–50L per jar, total volume 20L–200L
Feed Particle Size Soil material ≤10mm, other materials ≤3mm
Discharge Particle Size Minimum up to 0.1μm (varies with different materials and grinding processes)
Speed Ratio (Revolution : Rotation) Refer to main parameters of planetary ball mill
Rotation Speed Refer to main parameters of planetary ball mill
Speed Control Mode Stepless speed regulation by brand frequency converter

Working Principle
Low temperature planetary ball mill is a combined equipment of planetary ball mill and refrigeration device. During high-speed grinding, most materials will heat up due to friction or exothermic reactions, which may alter the physical and chemical properties of materials and produce negative grinding effects. Low temperature planetary ball mill is mainly used for material grinding processes requiring strict temperature control.

Standard Configuration
Item Description
Main grinding unit 1 pc
Grinding jars 4 pcs of 4 L grinding jars (Order Separately)

Available Materials: Al₂O₃ PU PTFE Ceramic SS Nylon

 
Grinding balls 1 set of grinding balls (Order Separately)

Available Materials: WC-Co Al₂O₃ PU-Fe Agate YSZ 304SS

Supporting Products
Grinding Balls: We also supply various grinding balls: stainless steel balls, zirconia balls, alumina balls, PU balls, carbon steel balls, tungsten balls, agate balls, cemented carbide balls, silicon nitride balls, high wear-resistant steel balls, manganese steel balls, nylon balls, cemented carbide, glass and other special metal materials.

Grinding Jars: We also provide grinding jars of various materials: agate, alumina corundum ceramics, zirconia ceramics, silicon nitride ceramics, silicon carbide ceramics, stainless steel, wear-resistant steel, manganese steel, nylon, polyurethane, cemented carbide, crystal glass, etc.
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official quotations.
EMAIL: inquiry@atomfair.com
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®

This low temperature planetary ball mill combines a planetary grinder with an air cooling unit for controlled processing of heat-sensitive materials. The grinding chamber temperature must be maintained between 5 and 15 degrees Celsius to prevent thermal degradation of the sample.

  • Material Suitability: The mill is designed exclusively for heat-sensitive materials that require low-temperature processing.
  • Temperature Control Requirement: The air cooling unit must be operational during grinding to maintain the chamber temperature within the specified 5-15°C range.

This procedure describes the safe and effective operation of the low temperature planetary ball mill for grinding heat-sensitive materials. Following these steps ensures proper temperature control and prevents material degradation.

Required Equipment: Atomfair XQM-16A Low Temperature Planetary Ball Mill, Grinding jar set with lids, Grinding balls

  1. Load Material and Balls
    Place the material to be ground and an appropriate number of grinding balls into the grinding jar.
  2. Secure Jar on Holder
    Install the filled grinding jar onto the jar holder and tighten the locking mechanism.
  3. Set Rotation Speed
    Adjust the variable frequency drive to set the desired rotation speed within the specified range.
  4. Activate Temperature Control
    Turn on the air cooling unit to maintain the grinding chamber temperature between 5 and 15 degrees Celsius.
  5. Start Grinding
    Press the start button and allow the mill to run for the required grinding duration.
  6. Monitor Temperature
    Monitor the temperature display periodically to ensure it remains within the set range.
  7. Stop and Unload
    Stop the mill and deactivate the cooling unit after grinding, then carefully remove the grinding jar.

What is the trade-off between grinding speed and temperature control in the XQM-16A, and how does the 510 r/min maximum speed affect the achievable particle size for heat-sensitive ceramics?

The XQM-16A operates at a maximum jar rotation speed of 510 r/min, which is lower than ambient-temperature models to accommodate the air cooling system that maintains 5–15°C. This reduced speed still enables ultra-fine grinding down to 0.1 μm, but the throughput per cycle may be lower compared to high-speed mills. The 3KW motor and gear drive ensure sufficient torque for the half-round jar configuration.

What are the maximum feed and jar volume constraints for processing soil materials in the XQM-16A low temperature planetary ball mill?

For the XQM-16A, the feed particle size must be ≤10mm for soil materials and ≤3mm for others. The jar volume per jar is 5L–50L (specific to model), and the total loading of material plus grinding balls must not exceed two-thirds of the jar volume to avoid overloading the gearing and cooling system.

What are the recommended operating conditions and space requirements for installing the XQM-16A air-cooled planetary ball mill in a laboratory?

The XQM-16A requires a 3KW power supply for the variable frequency drive, a sturdy bench capable of supporting 205kg, and dimensions of 950×600×710mm footprint. The air cooling unit exhausts warm air, so the lab should have adequate ventilation to prevent ambient temperature rise and ensure stable 5–15°C grinding chamber control.

The XQM-16A integrates a planetary ball mill with an air-cooling refrigeration system to maintain a 5–15°C grinding chamber, enabling ultra-fine grinding of heat-sensitive ceramic and battery materials without thermal degradation. Its 3KW gear drive and variable frequency speed control provide reproducible process optimization, though pre-crushing to ≤3mm feed is required and the cooling unit adds operational complexity.

Positive

  • Active low-temperature control (5–15°C): Integrated air-cooling refrigeration removes heat generated during grinding, preventing thermal alteration of heat-sensitive materials like electronic ceramics, lithium cobalt oxide, and pharmaceutical compounds.
  • Stepless variable frequency speed regulation: The 3KW motor with frequency converter enables infinite adjustment of rotation speed (up to 510 r/min), allowing precise tuning of grinding intensity for different material hardness and desired particle size (down to 0.1 μm).

Trade-offs

  • Feed size limitation requires pre-crushing: Maximum feed particle size is 10 mm for soil materials but only 3 mm for others, necessitating a primary crushing step for most feedstocks before introducing them to the mill.
  • Cooling system adds energy and maintenance overhead: The air conditioning compression refrigeration unit increases total power consumption and introduces additional components (compressor, condenser, fans) that require periodic maintenance, unlike passive-cooled planetary mills.

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).

Additional information

Weight 205 kg
Dimensions 95 × 60 × 71 cm

Related products