|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 120 × 120 × 15 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet requires process-media compatibility review and is limited to a recommended service temperature of no more than 300°C. The porous surface must be protected from crushing and contamination, and cleaning procedures must be matched to the process medium.
- Service Temperature Limit: Do not operate the sheet above the recommended service temperature of 300°C.
- Compatibility Review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Configuration Verification: Review both PPI cellular structure and micrometre filtration rating together when matching the sheet to an assembly.
Confirm the sheet's operating compatibility, protect its porous surface during handling, and select a cleaning method appropriate for the process medium. Perform these steps before installation and whenever the sheet is cleaned.
- Confirm process compatibility
Confirm the required filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select a cleaning method
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the combination of a 50 µm filtration rating and a 60 PPI pore density affect flow rate versus filtration precision for this sintered titanium foam sheet?
The sheet balances filtration precision at 50 µm with an open cellular structure of 60 PPI (approximately 0.42 mm cell spacing) and porosity of 35–45%. This combination provides interconnected flow paths with relative air permeability of 1×10⁻³ L/(cm²·min·Pa), supporting stable separation while maintaining low flow resistance for liquid-gas-solid applications.
What are the maximum service temperature and media compatibility considerations for this porous titanium sheet?
The recommended service temperature is ≤300°C as stated in the technical specifications. The titanium-based structure provides corrosion resistance in compatible media; however media compatibility must be reviewed before installation per the procurement check note. The sheet is intended for applications such as water treatment chemical processing pharmaceutical food clarification gas purification catalyst recovery etc but specific chemical resistance depends on the process medium.
What cleaning methods are recommended for maintaining this sintered titanium foam sheet without damaging its porous structure?
Acceptable cleaning methods include backflushing steam ultrasonic cleaning and compatible chemical procedures as specified in the handling notes. The porous surface must be protected from crushing and contamination during handling to preserve its interconnected pore structure (35–45% porosity) and filtration performance.
This sintered titanium foam sheet offers a 50 µm filtration rating with 60 PPI cellular structure, providing corrosion resistance and cleanability for liquid and gas separation, but requires careful handling and is limited to service temperatures below 300°C.
Positive
- Corrosion-resistant titanium construction: Titanium and titanium alloy provide corrosion resistance and thermal stability in compatible media, supporting use in aggressive chemical and seawater environments.
- Cleanable and reusable porous structure: The 35-45% interconnected porosity allows backflushing, steam, ultrasonic, or chemical cleaning, enabling repeated use in filtration and separation applications.
Trade-offs
- Temperature limit of 300°C: Recommended service temperature is ≤300°C, which restricts use in high-temperature processes above this threshold.
- Sensitive to crushing and contamination: The porous surface must be protected from physical crushing and contamination during handling and cleaning to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
