|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 100 × 100 × 1 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered porous titanium foam sheet is subject to mechanical and chemical constraints during handling, installation, and service. Its interconnected pore structure must be shielded from crushing and contamination while media compatibility and thermal limits are respected.
- Surface Protection: Protect the porous surface from crushing and contamination before and during installation.
- Media Compatibility: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before use.
- Thermal Limit: Do not exceed the recommended service temperature of 300°C without media- and pressure-specific validation.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Machining Protection: Avoid compressive loading that could crush the porous structure when cutting, welding, or machining the sheet.
How does the 20 µm filtration rating relate to the 20 PPI pore density, and what are the implications for filtration efficiency and flow rate?
The 20 µm filtration rating specifies the particle size retention, while the 20 PPI (pores per inch) indicates the cellular pore density. The source states that PPI describes the cellular structure and the micrometre value describes filtration precision. The sheet has a 35–45% porosity with interconnected paths and a relative air permeability of 1×10⁻⁴ L/(cm²·min·Pa). This combination means that while the filter can capture particles down to 20 µm, the 20 PPI structure provides a relatively open foam with ~1.27 mm cell spacing, balancing flow retention and permeability.
What are the maximum operating temperature and pressure limits for this sintered titanium foam sheet, and how does the porosity affect structural integrity under flow?
The recommended service temperature is ≤300°C as stated in the technical specifications. The source does not specify an operating pressure limit; it advises reviewing operating pressure, temperature, and media compatibility before quotation or installation. The 35–45% porosity and 1 mm thickness suggest the sheet is suitable for moderate-pressure applications, but exact pressure limits depend on the specific assembly and process conditions.
What cleaning methods are recommended for this sintered porous titanium sheet, and what precautions should be taken to avoid damaging the porous structure?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, as stated in the product description. The source warns to protect the porous surface from crushing and contamination. Because the sheet has a porosity of 35–45% and a thickness of 1 mm, it is structurally delicate; cleaning should avoid high-pressure jets or abrasive methods that could collapse the pores.
This 100 × 100 × 1 mm sintered titanium foam sheet offers a 20 µm filtration rating with a 20 PPI cellular structure and 35–45% porosity, but its 300°C service ceiling and need for handling care against surface crushing make pre-installation parameter review essential.
Positive
- 20 µm filtration with 20 PPI open structure: Combines a 20 µm filtration rating with a 20 PPI cellular structure and 35–45% porosity, providing interconnected passages for solid-liquid, gas-solid or gas-liquid separation with low flow resistance.
- Corrosion-resistant, cleanable titanium construction: The sintered titanium framework offers corrosion resistance and heat tolerance in compatible media, and supports backflushing, steam, ultrasonic or chemical cleaning for reused service.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature processes require alternative media or explicit verification of thermal stability and compatibility.
- Porous surface needs crush and contamination protection: The 1 mm porous sheet must be protected from crushing and contamination during handling; cleaning methods should be chosen according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
