Porous Titanium Foam Sheet 10μm 200×200×2mm ATOMFAIR®

$130.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered porous titanium foam sheet, 10 μm filtration, 110 PPI, 200 × 200 × 2 mm, 35–45% porosity, ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 2 mm, 110 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 10 µm filtration rating with a 110 PPI cellular structure in a 200 × 200 × 2 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 0.23 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 200 × 200 × 2 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T110-C0210
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	10 µm
Sheet Size	200 × 200 × 2 mm
Thickness	2 mm
Pore Density	110 PPI
Approximate Cell Spacing	0.23 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	5 × 10^-5 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

10 µm filtration precision paired with a 110 PPI porous-cell structure.
200 × 200 × 2 mm sheet supplied as one piece.
Cell spacing is approximately 0.23 mm for the 110 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 10 µm, 110 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 200 × 200 × 2 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This sheet is rated for continuous service up to 300°C and requires protection from crushing and contamination during handling. Media compatibility, operating pressure, temperature, and flow must be verified before installation.

Temperature Limit: Service temperature must not exceed 300°C to maintain structural integrity.
Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and chemical procedures selected per the process medium and operating procedure.
Mechanical Protection: The porous surface must be protected from crushing and contamination during handling and assembly.
Media Compatibility Verification: Confirm media compatibility, operating pressure, temperature, and dimensional tolerance before installation.
Machining Capability: The metallic structure supports cutting, welding, and basic machining for integration into assemblies.

FAQ

How does the 110 PPI cell structure relate to the 10 µm filtration rating in this sintered titanium foam sheet?

PPI (pores per inch) describes the cellular density—here approximately 0.23 mm cell spacing—while the 10 µm rating specifies the particle size retained. These are independent parameters: a 110 PPI structure can still achieve a 10 µm filtration rating through the interconnected pore network. Both values must be reviewed together to match the sheet to the required separation efficiency and flow characteristics.

What are the maximum operating temperature and media compatibility constraints for this sintered titanium foam sheet?

The recommended service temperature is ≤300°C. The titanium-based structure provides corrosion resistance and thermal stability, but media compatibility must be verified for the specific process fluid, operating pressure, and temperature before installation. The product is intended for solid-liquid, gas-solid, and gas-liquid separation in compatible media.

What cleaning and handling procedures are recommended for the 10 µm porous titanium foam sheet to maintain filtration performance?

Protect the porous surface from crushing and contamination. Recommended cleaning methods include backflushing, steam, ultrasonic, or compatible chemical cleaning, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to preserve the interconnected pore structure.

Assessment

This 200 × 200 × 2 mm sintered titanium foam sheet pairs a 10 µm filtration rating with a 110 PPI interconnected porous network (35–45% porosity, ~0.23 mm cell spacing), supporting solid-liquid, gas-solid, and gas-liquid separation trials where corrosion resistance and service up to 300°C are required.

Positive

Interconnected 35–45% porosity with 10 µm filtration: Powder-formed and high-vacuum sintered titanium provides interconnected through-pore flow paths with approximately 0.23 mm cell spacing, enabling stable separation and low flow resistance in compatible filtration processes.
Corrosion-resistant, machinable, cleanable titanium media: The metallic structure supports cutting, welding, and basic machining for assembly integration and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures while retaining corrosion resistance and thermal stability in compatible media.

Trade-offs

Service temperature capped at 300°C: The recommended maximum service temperature is 300°C, so higher-temperature filtration, gas purification, or thermal-management deployments would exceed the stated operating envelope.
Requires compatibility and surface protection review: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before quotation or installation, and the porous surface must be protected from crushing and contamination with cleaning media matched to the process.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).