|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 100 × 1 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Compatibility with the process medium, operating pressure, temperature, and target flow must be reviewed before installation. The porous surface must be protected from crushing and contamination, and service temperature should remain at or below 300°C.
- Media compatibility review: Review media compatibility, operating pressure, temperature, and target flow before quotation or installation.
- Porous surface protection: Protect the porous surface from crushing and contamination throughout handling and installation.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Service temperature limit: Maintain service temperature at or below 300°C to avoid exceeding the sintered material's recommended operational limit.
- Assembly integration: Confirm that any cutting, welding, or machining used for assembly integration does not crush or contaminate the porous surface.
This procedure prepares a sintered porous titanium sheet for installation or reuse without damaging its porous structure. Cleaning method selection depends on the process medium and the operating procedure in use.
Required Equipment: Backflushing apparatus, Steam generator, Ultrasonic bath, Compatible chemical cleaning agents
- Protect the sheet
Protect the porous surface from crushing and contamination before starting any cleaning or handling procedure. - Select a cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure. - Apply the selected cleaning method
Apply the chosen cleaning method without exceeding the titanium material's compatibility limits or service temperature limit. - Verify cleanliness and condition
Verify that the porous surface is free of contamination and undamaged after cleaning before reuse or installation.
How does the 110 PPI pore density affect the 30 µm filtration rating in terms of flow rate and particle retention?
The 110 PPI (pores per inch) defines the cellular structure's cell density, while the 30 µm rating specifies the filtration precision. The 110 PPI structure with approximately 0.23 mm cell spacing and 35–45% porosity provides interconnected flow paths, yielding a relative air permeability of 5×10⁻⁴ L/(cm²·min·Pa). This combination balances flow rate with particle retention, but the specific trade-off depends on the application's pressure and viscosity conditions.
What temperature and media compatibility constraints apply to this sintered titanium foam sheet in chemical filtration?
The recommended service temperature is ≤300°C to preserve structural integrity. The titanium-based material provides corrosion resistance in compatible media, but the specific operating pressure, temperature, and media compatibility must be reviewed before quotation or installation. No specific pressure limit is stated in the product description, so engineering evaluation is required.
Can this 100×100×1 mm porous titanium sheet be cut, welded, or machined for integration into existing assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The porous surface must be protected from crushing and contamination during handling. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures to maintain the interconnected pore structure.
The Atomfair AF-T110-A0130 sintered porous titanium foam sheet combines a 30 µm filtration rating with a 110 PPI cellular structure in a 100 x 100 x 1 mm format, supported by 35–45% interconnected porosity for low-resistance liquid and gas flow. Its titanium-based construction provides corrosion resistance and cleanability, while the ≤300°C service temperature limit and the need to protect the porous surface from crushing and contamination define the practical operating envelope.
Positive
- Interconnected porous structure with controlled filtration: The 35–45% porosity and interconnected through-pore paths provide low flow resistance while the 30 µm filtration rating and approximately 0.23 mm cell spacing support stable separation in solid-liquid, gas-solid, and gas-liquid applications.
- Corrosion-resistant and cleanable titanium construction: The sintered titanium/titanium-alloy framework provides corrosion resistance and thermal stability in compatible media, and the metallic porous sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- 300°C maximum service temperature: Recommended service temperature is limited to ≤300°C, so higher-temperature gas, steam, or thermal-management applications must be evaluated against the operating ceiling and media compatibility before deployment.
- Porous surface requires handling protection: The open porous surface can be damaged by crushing or contamination during handling and installation, and the cleaning method must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
