|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 100 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered titanium foam sheet requires protection from surface crushing and contamination to preserve its porous structure. Media compatibility, operating pressure, temperature, and flow must be reviewed before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Service Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility Review: Confirm media compatibility with the titanium structure before use in any process stream.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
Proper handling and cleaning preserve the porous structure and filtration performance of the titanium sheet. Follow these steps to avoid damage and maintain functionality.
Required Equipment: Clean, lint-free gloves, Ultrasonic bath or backflushing system
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Handle with care
Handle the sheet by its edges using clean gloves to avoid crushing or contaminating the porous surface. - Install securely
Install the sheet in the filtration assembly ensuring a proper seal without over-tightening. - Clean appropriately
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods based on the process medium. - Verify performance
Verify flow and filtration performance after cleaning to confirm the sheet is not damaged.
How does the 30 µm filtration rating relate to the 110 PPI pore density on this sintered titanium foam sheet?
The 30 µm filtration rating specifies the particle size retention, while the 110 PPI (pores per inch) indicates the cellular structure density. The product balances these parameters with a porosity of 35–45%, a relative air permeability of 5 × 10⁻⁴ L/(cm²·min·Pa), and an approximate cell spacing of 0.23 mm. Both values must be reviewed together to match the sheet to the required flow and filtration precision.
Can the 100 × 100 × 5 mm sintered titanium foam sheet be welded or machined for integration into a custom filtration assembly?
Yes, the titanium-based porous structure supports cutting, welding, and basic machining for assembly integration. The 100 × 100 × 5 mm sheet can be adapted, but the porous surface must be protected from crushing and contamination during fabrication. Custom dimensions are also available upon consultation.
What cleaning methods are recommended for the 30 µm porous titanium foam sheet to avoid damaging its interconnected pore structure?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, as stated in the product handling instructions. The choice depends on the process medium and operating procedure. The porous surface must be protected from crushing and contamination during cleaning.
This sintered titanium foam sheet is a 30 µm, 110 PPI, 100 × 100 × 5 mm porous medium with an interconnected 35–45% porosity network, making it suitable for lab-scale filtration, flow distribution and porous-electrode studies once media compatibility and the ≤300°C service limit are confirmed.
Positive
- Interconnected porosity with 30 µm precision: The 110 PPI open-cell structure provides approximately 0.23 mm cell spacing, 35–45% porosity and interconnected through-pores, supporting stable separation and controlled filtration for liquid and gas streams.
- Corrosion-resistant and cleanable metallic filter medium: The high-vacuum sintered titanium structure offers corrosion resistance, thermal stability and low flow resistance in compatible media. Backflushing, steam, ultrasonic and compatible chemical cleaning methods permit reuse under suitable process conditions.
Trade-offs
- Service temperature limited to ≤300°C: Recommended service temperature is ≤300°C, so higher-temperature or aggressive process conditions must be assessed before installation. Media compatibility, operating pressure, target flow and dimensional tolerance also need review prior to deployment.
- Porous surface requires handling and cleaning care: The exposed porous surface must be protected from crushing and contamination during handling. The cleaning method, whether backflushing, steam, ultrasonic or chemical, must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
