Sintered Titanium Foam Sheet 20μm 110 PPI ATOMFAIR®

$120.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Sintered titanium foam sheet with 20 μm filtration, 110 PPI pores, 200 × 200 × 1.5 mm size, 35–45% porosity and ≤300°C service for lab trials. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 1.5 mm, 110 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 20 µm filtration rating with a 110 PPI cellular structure in a 200 × 200 × 1.5 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 0.23 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 200 × 200 × 1.5 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T110-C1520
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	20 µm
Sheet Size	200 × 200 × 1.5 mm
Thickness	1.5 mm
Pore Density	110 PPI
Approximate Cell Spacing	0.23 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	1 × 10^-4 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

20 µm filtration precision paired with a 110 PPI porous-cell structure.
200 × 200 × 1.5 mm sheet supplied as one piece.
Cell spacing is approximately 0.23 mm for the 110 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 20 µm, 110 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 200 × 200 × 1.5 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

How does the 110 PPI pore density relate to the 20 µm filtration rating in this sintered titanium foam sheet?

PPI (pores per inch) describes the cellular structure density—110 cells per inch—while the micrometre value (20 µm) specifies filtration precision based on pore size distribution. They are independent parameters; together they define flow resistance and separation efficiency for solid-liquid or gas-solid applications.

What are the maximum service temperature and chemical compatibility limitations for this sintered titanium foam sheet?

The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media; however media compatibility must be reviewed before installation because aggressive chemicals may degrade performance.

What cleaning methods are recommended for this porous titanium foam sheet without damaging its structure?

Recommended cleaning methods include backflushing steam cleaning ultrasonic cleaning or compatible chemical procedures according to the process medium. The porous surface must be protected from crushing and contamination during handling to preserve structural integrity.

Assessment

This 200 × 200 × 1.5 mm sintered titanium foam sheet combines a 20 µm filtration rating with a 110 PPI open-cell structure, 35–45% porosity, and a ≤300°C service limit, making it suitable for liquid, gas, and solid-liquid separation studies where media compatibility and operating pressure are confirmed before installation.

Positive

Sintered open-pore titanium structure: Powder forming and high-vacuum sintering create interconnected 35–45% porosity paths with approximately 0.23 mm cell spacing, supporting low flow resistance and stable separation in solid-liquid, gas-solid, and gas-liquid applications.
Corrosion-resistant and cleanable metallic media: The titanium/titanium-alloy construction provides corrosion resistance and thermal stability in compatible media, while the porous sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.

Trade-offs

Service temperature capped at 300°C: Recommended service temperature is limited to ≤300°C; higher-temperature processes require alternative media, and operating pressure, media compatibility, and dimensional tolerance must be confirmed before installation.
Porous surface requires crush and contamination protection: Handling must protect the porous surface from crushing and contamination, and the cleaning method must be selected according to the process medium and operating procedure to preserve filtration performance.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).