|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 160 × 160 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires protection from physical crushing and contamination during handling and storage. Compatibility with process media, operating temperature, and pressure must be verified before use.
- Temperature Limit: Recommended service temperature does not exceed 300°C.
- Media Compatibility: Process media compatibility must be confirmed to avoid corrosion or degradation.
- Crushing Protection: The porous surface is susceptible to crushing; avoid impact or compressive loads.
- Contamination Prevention: Protect the sheet from contamination during handling and storage; use appropriate cleaning methods.
- Cleaning Methods: Backflushing, steam, ultrasonic, or chemical cleaning may be used depending on the process medium.
How does the 30 PPI pore density relate to the 20 µm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure with approximately 0.85 mm cell spacing, while the 20 µm rating specifies the filtration precision. The interconnected porous framework with 35–45% porosity allows low flow resistance while capturing particles above 20 µm. The relative air permeability is 1×10⁻⁴ L/(cm²·min·Pa), confirming balanced flow and retention.
What are the maximum operating temperature and media compatibility considerations for this titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based structure provides corrosion resistance in compatible media, but specific media compatibility must be reviewed before installation. The metallic construction supports cutting, welding, and basic machining for integration into assemblies, but operating pressure and temperature should be confirmed per application.
What cleaning methods are recommended for maintaining the 20 µm filtration performance of this titanium foam sheet?
Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination to preserve the interconnected pore structure and the 20 µm filtration rating.
This 20 µm, 30 PPI sintered titanium foam sheet (160 × 160 × 5 mm) offers a corrosion-resistant, thermally stable porous structure with 35–45% interconnected porosity and a bulk density of 2.48–2.93 g/cm³, suitable for solid-liquid and gas separation in laboratory and engineered filtration assemblies, though its 300°C service temperature limit and sensitivity to surface contamination require careful handling and media compatibility review.
Positive
- Corrosion and thermal resistance: Titanium-based porous construction provides corrosion resistance and thermal stability up to 300°C in compatible media, enabling use in aggressive chemical, petrochemical, and pharmaceutical filtration environments.
- Cleanable and reusable metallic structure: The sintered titanium framework supports backflushing, steam, ultrasonic, and chemical cleaning procedures, allowing repeated use and reducing consumable waste in continuous filtration operations.
Trade-offs
- Service temperature limited to 300°C: Recommended maximum service temperature is 300°C, which restricts deployment in high-temperature gas or molten-media filtration processes without exceeding material limits.
- Surface vulnerable to crushing and contamination: The porous surface must be protected from mechanical crushing and particulate contamination during handling and installation, requiring careful assembly procedures to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
