|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 160 × 160 × 15 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from surface crushing and contamination to preserve filtration integrity. Recommended service temperature does not exceed 300°C, and media compatibility must be verified before installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility with the titanium or titanium-alloy structure before use to prevent corrosion or failure.
Inspect the sheet for damage before installation and select a cleaning method appropriate for the process medium. Protect the porous structure from mechanical crushing and contamination throughout use.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed by excessive clamping force. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or compatible chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, following manufacturer guidelines for duration and intensity. - Rinse and dry the sheet
Rinse the sheet with deionized water and dry it in a clean, low-particulate environment before reuse.
How does the 60 PPI pore density correlate with the 20 µm filtration rating in this sintered titanium foam sheet?
The 60 PPI (pores per inch) describes the cellular structure, while the 20 µm value specifies filtration precision. The 60 PPI structure yields an approximate cell spacing of 0.42 mm and a porosity of 35–45%, creating interconnected pathways that support the 20 µm filtration rating. The two parameters are independent but must be matched to the application requirements.
What is the maximum recommended service temperature for this titanium foam sheet, and can it be used in high-temperature gas filtration up to 300°C?
The recommended service temperature is ≤300°C, making it suitable for high-temperature gas filtration within that limit. The titanium-based structure provides thermal stability and corrosion resistance in compatible media. However, media compatibility, operating pressure, and target flow should be reviewed before installation.
What are the recommended cleaning methods to maintain the porous structure of this sintered titanium foam sheet?
Recommended cleaning methods include backflushing, steam, ultrasonic cleaning, and compatible chemical procedures. The metallic construction supports these methods without damaging the 35–45% porosity interconnected structure. The porous surface must be protected from crushing and contamination during handling and cleaning.
This 20 µm, 60 PPI sintered titanium foam sheet (160 × 160 × 15 mm) offers a corrosion-resistant, cleanable porous metal structure with 35–45% porosity and interconnected flow paths, suitable for solid-liquid and gas separation in laboratory and engineered filtration assemblies. Its metallic construction supports cutting, welding, and machining for integration, but the 300°C service temperature limit and need to protect the porous surface from crushing and contamination are key operational constraints.
Positive
- Corrosion-resistant and thermally stable: Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, with a recommended service temperature up to 300°C, enabling use in aggressive chemical and high-temperature filtration environments.
- Cleanable and reusable metallic foam: The metallic construction supports cleaning via backflushing, steam, ultrasonic, or compatible chemical procedures, allowing reuse and reducing consumable waste in laboratory and process filtration.
Trade-offs
- Limited service temperature of 300°C: The recommended maximum service temperature is 300°C, which restricts use in high-temperature processes such as molten salt or high-temperature gas filtration above this threshold.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination during handling and installation, as mechanical damage or particulate ingress can compromise filtration precision and flow uniformity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
