Sintered Titanium Foam Sheet 20μm 20 PPI 10mm ATOMFAIR®

$150.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet, 120 × 120 × 10 mm with 20 μm filtration, 20 PPI, 35–45% porosity and ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 120 × 120 × 10 mm, 20 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 20 µm filtration rating with a 20 PPI cellular structure in a 120 × 120 × 10 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 1.27 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 120 × 120 × 10 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T20-E1020
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	20 µm
Sheet Size	120 × 120 × 10 mm
Thickness	10 mm
Pore Density	20 PPI
Approximate Cell Spacing	1.27 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	1 × 10^-4 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

20 µm filtration precision paired with a 20 PPI porous-cell structure.
120 × 120 × 10 mm sheet supplied as one piece.
Cell spacing is approximately 1.27 mm for the 20 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 20 µm, 20 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 120 × 120 × 10 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This document defines handling and service constraints for the sintered porous titanium foam sheet. These constraints are derived from the product's stated material and cleaning guidance.

Compatibility review: Confirm media compatibility, operating pressure, target flow, and dimensional tolerance before putting the sheet into service.
Thermal constraint: Keep the sintered porous titanium sheet at or below the recommended service temperature of 300°C in the intended process environment.
Surface protection: Protect the porous surface from crushing and contamination during handling, installation, and storage.
Cleaning compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and the operating procedure.
Assembly matching: Review the PPI cell structure and the micrometre filtration rating together when matching the sheet to an assembly.

FAQ

How does the 20 µm filtration rating relate to the 20 PPI cellular structure in this sintered titanium sheet?

The 20 µm filtration rating specifies the particle size retention threshold, while the 20 PPI (pores per inch) describes the density of the cellular porous structure. They are independent parameters; both must be reviewed together when matching the sheet to a filtration assembly, as stated in the product's configuration note.

What are the recommended service temperature limits and compatible cleaning procedures for the Atomfair AF-T20-E1020 porous titanium sheet?

The recommended service temperature is ≤300°C. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, selected according to the process medium and operating procedure, as specified in the handling and cleaning guidance.

Can this 120×120×10 mm sintered titanium foam sheet be machined or welded for integration into existing assemblies?

Yes, the metallic titanium construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling and processing.

Assessment

This 120 × 120 × 10 mm sintered titanium foam sheet pairs a 20 µm filtration rating with a 20 PPI open-cell structure at 35–45% porosity, providing an interconnected metallic flow path rated for ≤300°C service and cleanable reuse in filtration and separation trials.

Positive

Interconnected porosity balances retention and flow: Powder-formed and high-vacuum sintered titanium yields 35–45% porosity with approximately 1.27 mm cell spacing, supporting 20 µm filtration while maintaining open through-pore paths for gas and liquid flow.
Corrosion-resistant, cleanable metallic structure: The titanium-based porous sheet is suited to compatible corrosive or thermal media up to 300°C and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical methods; the metal body also allows cutting, welding, and basic machining for assembly integration.

Trade-offs

Recommended service temperature limited to 300°C: Although described as heat tolerant, the stated recommended service temperature is ≤300°C; processes above this range exceed the sheet's operating envelope and require explicit validation before installation.
Porous surface must be protected during handling: The open-cell surface is vulnerable to crushing and contamination during handling; cleaning methods must be selected according to the process medium and operating procedure to preserve the pore structure.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).