|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 2 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet must be protected from mechanical crushing and contamination during handling. The product is rated for continuous service up to 300°C and requires media compatibility verification before use.
- Thermal Constraint: Maximum recommended service temperature is 300°C to avoid structural degradation.
- Mechanical Protection: Protect the porous surface from crushing forces and contamination during handling and installation.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and chemical procedures based on process medium.
- Processing Compatibility: The metallic structure supports cutting, welding, and basic machining for assembly integration.
- Media Compatibility: Confirm media compatibility, operating pressure, temperature, and flow before installation.
How does the 10 µm filtration rating relate to the 20 PPI pore density, and what are the implications for flow rate and particle retention?
The 10 µm filtration rating specifies the particle size cut-off, while the 20 PPI (pores per inch) describes the cellular macrostructure. With a porosity of 35–45% and cell spacing of approximately 1.27 mm, this sintered titanium sheet balances fine particle retention (10 µm) with a relative air permeability of 5 × 10⁻⁵ L/(cm²·min·Pa). The interconnected through-pore network supports low flow resistance, but the effective filtration precision and throughput depend on matching both parameters to the target fluid viscosity and operating pressure.
What are the key considerations for integrating this 200 × 200 × 2 mm sintered titanium sheet into a custom filtration assembly?
The sheet's titanium alloy construction allows cutting, welding, and basic machining for custom assembly integration. However, you must confirm media compatibility, operating pressure, and temperature (recommended service temperature ≤300 °C) before installation. The 2 mm thickness and 200 × 200 mm format require a compatible sealing method to prevent bypass, and the porous surface should be protected from crushing during clamping.
What cleaning and handling procedures are recommended for maintaining the filtration performance of this porous titanium foam sheet?
After use, the sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures depending on the process medium. The porous surface must be protected from crushing and contamination during handling and storage. Because the material is sintered titanium, it is reusable under compatible conditions, but aggressive chemicals or mechanical abrasion that could damage the interconnected pore structure should be avoided.
This 200×200×2 mm sintered titanium foam sheet provides 10 µm filtration precision with a 20 PPI cellular structure, offering 35–45% interconnected porosity for low-resistance liquid/gas separation. Its corrosion resistance, thermal stability to 300°C, and machinability support lab integration, but media compatibility and handling precautions against crushing are essential for reliable operation.
Positive
- 10 µm filtration with 20 PPI cellular structure: The 10 µm filtration rating combined with 20 PPI porous-cell structure provides a balance of fine particle retention and open flow paths, suitable for solid-liquid, gas-solid, and gas-liquid separation in laboratory and engineered filtration assemblies.
- Chemically resistant and machinable titanium construction: The sintered titanium framework offers corrosion resistance and thermal stability up to 300°C, and can be cut, welded, or machined for integration into custom assemblies, supporting backflushing, steam, ultrasonic, or chemical cleaning for reuse.
Trade-offs
- Temperature limit of 300°C: The recommended service temperature is ≤300°C, restricting use in high-temperature processes beyond this threshold; exceeding this limit may compromise structural integrity or filtration performance.
- Crush sensitivity and contamination risk: The porous surface must be protected from crushing and contamination during handling and cleaning; improper mechanical force or incompatible cleaning agents can damage the interconnected pore structure or introduce contaminants.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
