|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 100 × 1 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This titanium foam sheet imposes handling, compatibility, and thermal constraints that must be reviewed before installation. Surface crushing, contamination, and media or pressure mismatches are the primary risks to avoid.
- Surface Protection Requirement: Protect the sheet's porous surface from crushing and contamination during all handling and installation activities.
- Service Temperature Limit: Keep the operating temperature within the manufacturer's stated service limit to avoid thermal overexposure.
- Cleaning Method Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Modification Constraint: Cut, weld, or machine the sheet only when the required assembly integration permits such modification.
- Pre-installation Compatibility Review: Confirm media compatibility, operating pressure, target flow, and dimensional tolerance before quotation or installation.
Protect the porous structure from physical damage and contamination before and during installation. Validate cleaning and operating conditions against the process medium to maintain filtration performance.
- Inspect the sheet
Inspect the sheet for visible surface damage, deformation, or contamination before handling. - Protect the porous surface
Protect the porous surface from crushing and contamination throughout handling and installation. - Validate operating limits
Confirm that the planned media, operating pressure, and temperature remain within the sheet's stated service limits. - Select the cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure. - Modify only if required
Cut, weld, or machine the sheet only when assembly integration requires physical modification.
How does the 110 PPI pore density relate to the 10 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure with an approximate cell spacing of 0.23 mm, while the 10 µm rating specifies the filtration precision. The combination provides a balance between structural integrity and particle retention. The 35–45% porosity ensures interconnected flow paths, and the general filtration range of the product family is 0.45–100 µm, so the 10 µm rating falls within that range.
What are the key integration requirements for incorporating this 100×100×1 mm sintered titanium foam sheet into a filtration assembly?
The sheet can be cut, welded, and machined for assembly integration, but the porous surface must be protected from crushing and contamination. The recommended service temperature is ≤300°C. Media compatibility, operating pressure, target flow, and dimensional tolerances must be reviewed before quotation or installation. Cleaning options include backflushing, steam, ultrasonic, or chemical procedures depending on the process medium.
What are the recommended cleaning procedures for maintaining the 10 µm filtration performance of the sintered titanium foam sheet?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, selected according to the process medium and operating procedure. The metallic titanium construction supports repeated cleaning cycles without degrading the 35–45% porosity or the 10 µm filtration precision. Care must be taken to avoid crushing the porous surface during handling and cleaning.
This 100 × 100 × 1 mm sintered porous titanium sheet pairs a 10 µm filtration rating with a 110 PPI open-cell structure, 35–45% porosity, and roughly 0.23 mm cell spacing, giving engineers a corrosion-resistant, cleanable porous-metal medium for solid-liquid, gas-solid, and gas-liquid separation trials within a ≤300°C service envelope.
Positive
- Interconnected porosity with 10 µm filtration precision: The 110 PPI titanium foam structure provides interconnected through-pores at 35–45% porosity and about 0.23 mm cell spacing, supporting low flow resistance and stable separation for solid-liquid, gas-solid, and gas-liquid filtration.
- Corrosion-resistant, cleanable, and machinable metal structure: The sintered titanium framework provides corrosion resistance and thermal stability in compatible media, and the metallic construction permits cutting, welding, and basic machining while allowing backflushing, steam, ultrasonic, or compatible chemical cleaning.
Trade-offs
- Service temperature limited to ≤300°C: Recommended service temperature is capped at 300°C, so process streams approaching or exceeding this limit require alternative media selection or explicit thermal validation before installation.
- Porous surface requires handling and compatibility review: The porous surface must be protected from crushing and contamination during handling, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
