8 Inch Double-Side Oxidation Oxidized Silicon WaferProduct Type: Double-Side Oxidation
Research-grade laboratory product
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, substrate matching or configuration confirmation, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This document defines the technical constraints that must be confirmed for the Atomfair 8-inch double-side oxidation silicon wafer. Configuration parameters and processing route must be verified before quotation and downstream use.
- Processing Route Selection: Confirm whether thermal oxidation or PECVD will be used as the intended wafer processing method.
- Substrate and Surface Compatibility: Confirm that the substrate, surface treatment, and intended integration requirements are compatible with the selected wafer configuration.
- Orientation and Conductivity Verification: Verify the required crystal orientation, conductivity type, and target resistivity band before ordering.
- Custom Dimension Constraint: Specify any custom dimensions for supplier confirmation before processing begins.
Use this procedure to specify an Atomfair 8-inch double-side oxidized silicon wafer for quotation. Confirm all technical parameters and compatibility requirements before submitting a request.
- Confirm Wafer Configuration
Confirm the 8-inch size, double-side oxidation surface, crystal orientation, conductivity type, and target resistivity band before quotation. - Specify Processing Route
Specify thermal oxidation or PECVD as the intended processing method and include any custom dimensions in the request. - Verify Compatibility
Confirm that the substrate, surface treatment, and integration requirements are compatible with the selected wafer. - Submit Request
Include the required specification and quantity when requesting quotation support from the technical sales team.
What resistivity ranges are available for the 8-inch double-side oxidized silicon wafer and what are the typical applications for each range?
The wafer supports heavily doped (< 0.001 ohm.cm), lightly doped (1-100 ohm.cm), and undoped high-resistivity (> 100-20000 ohm.cm) ranges. Heavily doped wafers are suitable for low-resistance substrate applications, lightly doped for standard device layers, and undoped for high-resistivity requirements such as RF or high-frequency devices. The target resistivity band must be confirmed at quotation.
Which crystal orientations are offered for the 8-inch double-side oxidized silicon wafer and how does orientation affect device integration?
Crystal orientations <100>, <111>, and <110> are listed. The appropriate orientation depends on the intended device architecture—for example, <100> is commonly used for CMOS processing, while <111> may be preferred for certain MEMS or epitaxial growth. The orientation must be specified before quotation.
What specifications must be confirmed before ordering an 8-inch double-side oxidized silicon wafer?
The size (8 inch), double-side oxidation configuration, crystal orientation, conductivity type (N-type, P-type, or undoped high-resistivity), target resistivity band, and processing method (thermal oxidation or PECVD) must be confirmed. Any custom dimensions must also be specified. Quotation requires all of these details along with the intended quantity.
The 8-inch double-side oxidized silicon wafer offers thermal oxidation and PECVD processing routes with selectable crystal orientation (<100>, <111>, <110>), conductivity type, and a wide resistivity range (0.001–20000 ohm.cm) for diverse semiconductor device R&D applications.
Positive
- Double-side oxidation flexibility: Double-side oxidation supports symmetrical device structures or backside passivation layers, reducing processing steps in bipolar or MEMS fabrication.
- Wide resistivity and doping options: Available with heavily doped (<0.001 ohm.cm), lightly doped (1-100 ohm.cm), or undoped high-resistivity (up to 20000 ohm.cm) substrates, accommodating applications from power devices to high-frequency RF circuits.
Trade-offs
- Specification confirmation required: Crystal orientation, conductivity type, resistivity band, and processing method (thermal oxidation vs. PECVD) must all be confirmed before quotation, adding a qualification step to procurement.
- Custom dimensions need approval: Size customization is supported but subject to specification confirmation, which may introduce lead-time delays for non-standard wafer geometries.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
