| Speed Range: 500-8500 rpm (Dual-Stage) |
Substrate Sizes: Φ5 mm to Φ100 mm (Up to 4″) |
Coating Uniformity: ±2% (Speed Stability: ±1%) |
Electrical Rating: 40W, 110-240V Wide Voltage |
1. Scientific Overview & Thin-Film Deposition Precision
The ATOMFAIR® KW-4A Benchtop Spin Coater is an internationally recognized laboratory instrument engineered for uniform solution-phase thin-film deposition across semiconductor research, photoresist lithography, perovskite photovoltaic coating, and nanomaterial synthesis. Featuring a robust 40W brushless DC drive system, the KW-4A delivers stable rotational velocities spanning from 500 to 8500 rpm with a speed stability tolerance of ±1% and a film thickness uniformity of ±2%.
Designed to accommodate substrate diameters ranging from Φ5 mm fragments to Φ100 mm (4-inch) wafers, the KW-4A integrates a precision dual-stage timing sequencer. This allows researchers to independently program Stage I (solution spreading / low speed) and Stage II (thin-film formation / high speed), ensuring smooth liquid spreading without splashing and subsequent solvent evaporation control.
Dual-Stage Process Benchmark: Stage I operates from 500 to 8500 rpm (0-999 s) for precursor spreading, followed immediately by Stage II from 1000 to 8500 rpm (0-999 s) for film thinning and crystallization, governed by real-time digital countdown timers.
2. Instrument Architecture & Enhanced Safety Features
Built with a durable chemical-resistant chassis and an easy-to-clean stainless steel fluid bowl, the modern KW-4A incorporates critical operational enhancements for academic cleanroom and multi-user facility workflows:
|
Dual-Stage Digital Speed Control
Two independent programmable potentiometer dials regulate low-speed solution spreading (Stage I: 500–8500 rpm, 0–999 s) and high-speed film thinning (Stage II: 1000–8500 rpm, 0–999 s).
|
Enhanced Cleanroom Safety Interlocks
Engineered specifically for academic cleanroom and multi-user laboratory environments, the KW-4A incorporates active hardware interlocks and dedicated panel controls:
|
3. Verified Technical Specifications
All specifications below are factory batch-tested standards for the ATOMFAIR AF-EQ-SC-KW4A-8500-0AF8 instrument line:
| Technical Parameter | Verified Factory Standard | Measurement Basis |
|---|---|---|
| Instrument Model | KW-4A Benchtop Spin Coater (Manual Dual-Stage) | Laboratory Standard |
| Stage I Speed Range | 500 – 8500 rpm (Low Speed Dispense) | Digital Optical Tachometer |
| Stage I Coating Time | 0 – 999 seconds (Continuous countdown display) | Microprocessor Clock |
| Stage II Speed Range | 1000 – 8500 rpm (High Speed Thinning) | Digital Optical Tachometer |
| Stage II Coating Time | 0 – 999 seconds (Continuous countdown display) | Microprocessor Clock |
| Substrate Compatibility | Φ5 mm to Φ100 mm (Silicon wafers, glass, quartz) | Vacuum Chuck Caliper |
| Rotational Speed Stability | ±1% full scale | Closed-Loop Motor Sensor |
| Coating Thickness Uniformity | ±2% across compatible active substrate area | Spectroscopic Ellipsometry |
| Drive Motor Rating | 40W Brushless DC Motor | Continuous Duty |
| Electrical Input | Single-Phase 110-240V AC, 50/60 Hz (Wide Voltage) | Universal Plug Options |
| Vacuum Requirement | Pumping Speed ≥ 60 L/min (Dedicated Oil-Free Vacuum Pump Included) | Vacuum Gauge Standard |
| Safety Interlocks | Key-interlock wafer fly-off prevention; panel pump control | Integrated Hardware |
| Instrument Net Weight | 6.5 kg (Spin Coater Main Unit) | Calibrated Platform Scale |
| Shipping Gross Weight | 12.7 kg (Main unit + vacuum pump + 3 chucks + 2 power cords + packaging) | Factory Verified Export Weight |
| Chassis Dimensions (W × D × H) | 210 mm × 220 mm × 160 mm | Compact Benchtop Caliper |
| Export Package Dimensions (L × W × H) | 475 mm × 350 mm × 375 mm (47.5 × 35 × 37.5 cm) | Reinforced Export Carton |
4. Target Applications, Package Included & Facility Requirements
The KW-4A spin coater serves as an essential deposition platform across academic, governmental, and industrial materials science facilities:
Primary Target Research Applications
- Photolithography & Microelectronics: Uniform coating of positive and negative photoresists (SU-8, PMMA, AZ series) on silicon wafers up to 4 inches;
- Perovskite & Organic Photovoltaics: Controlled multi-stage crystallization and solvent quenching of perovskite precursor solutions;
- 2D Materials & Nanocoatings: Spin-assisted layer-by-layer assembly of graphene oxide, MXenes, and transition-metal dichalcogenides;
- Polymer & Sol-Gel Films: Optical dielectric coatings, self-assembled monolayers, and biological surface functionalization.
Standard Package Configuration (Factory Checklist)
Each standard export reinforced shipping carton strictly contains the verified factory configuration:
- 1 × KW-4A Benchtop Spin Coater Main Unit (Dual-stage precision coater);
- 1 × Dedicated Oil-Free Vacuum Pump (High-efficiency vacuum source, ≥ 60 L/min);
- 3 × Interchangeable Substrate Chucks / Holders (Φ5 mm to Φ100 mm capacity);
- 2 × Heavy-Duty Regional Power Cords (1 for spin coater, 1 for vacuum pump; matched to selected regional plug standard: CN / US / EU / UK / AU).
Facility & Installation Requirements
Operate the KW-4A on a rigid, vibration-free laboratory bench or inside an ambient fume hood/glovebox. Connect the rear vacuum port to an oil-free diaphragm or rotary vane vacuum pump capable of delivering at least 60 L/min pumping capacity. Ensure operating ambient temperature is maintained between 15 °C and 30 °C with relative humidity < 65%. Detailed dual-stage potentiometer calibration and step-by-step firmware routines are comprehensively documented in the accompanying official physical User Manual.
5. Matched Substrates & Laboratory Coater Selection Matrix
ATOMFAIR provides complementary electronic-grade substrates, wafers, and laboratory spin coater configurations:
| Product Model | Equipment Type | Capacity / Spec | Application Recommendation |
|---|---|---|---|
| KW-4A Spin Coater (This Model) | Dual-Stage Manual Benchtop | 500–8500 rpm, Φ5–100 mm | Baseline academic research & teaching labs |
| Dual-Stage Spin Coater (8000 rpm) | Benchtop Vacuum Coater | 500–8000 rpm, Dual-Stage | Photoresist & perovskite solution deposition |
| AF-4pro Programmable Spin Coater | Multi-Step Precision Coater | 100–10000 rpm, Up to 4-Inch | Advanced multi-step programmable spin profiles |
| AF-6pro Cleanroom Spin Coater | 6-Inch Wafer Coater | 100–10000 rpm, Up to 6-Inch | Semiconductor pilot lines & wafer facilities |
| AF-8pro Large-Wafer Spin Coater | 8-Inch Wafer Coater | 100–10000 rpm, Up to 8-Inch | Large substrate lithography & optical coatings |
Need custom chuck geometries or glovebox feedthroughs? Inquire About Custom Engineering Services
6. Maintenance & Chemical Compatibility Guidelines
To ensure years of reliable service and avoid contamination across sensitive optical and semiconductor batches:
- Chamber Cleaning: Clean the stainless steel bowl and acrylic lid promptly after each coating run using appropriate lab solvents (acetone, isopropanol, or DI water). Do not use abrasive scouring pads;
- Vacuum Chuck Maintenance: Periodically inspect the central vacuum suction hole on the chuck for dried chemical residue. Clean with a lint-free swab dipped in ethanol to maintain strong substrate hold-down;
- Solvent Trap Recommendation: When spinning aggressive polar aprotic solvents (DMF, DMSO, NMP) or concentrated acids, install an inline liquid collection trap between the instrument exhaust and vacuum pump.
Custom Vacuum Chucks & Substrate Fixtures
Atomfair manufactures specialized custom spin coater chucks engineered from chemical-grade PTFE, PEEK, stainless steel, and porous ceramic. We accommodate irregular sample fragments (down to 3 × 3 mm), square optical glass coverslips (10 × 10 mm, 20 × 20 mm), and thick cavity chucks for recess-mounted optical prisms.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).






