1435L-4 Dual-Flow Energy-Saving Nitrogen Cabinet, Anti-Static Cabinet BodyResearch-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
For bulk orders, configuration review, accessory matching or application-specific guidance, contact our engineering sales team.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The cabinet requires a stable indoor surface and a continuous nitrogen supply to maintain the 1%-60% RH range. Door seals and anti-static coating must remain intact to prevent moisture ingress and electrostatic discharge.
- Installation Environment: Place the cabinet on a level, vibration-free surface away from direct sunlight and heat sources.
- Gas Supply Requirements: Verify a stable nitrogen source with pressure and flow suitable for the large-flow (15-50 L/min) and small-flow (1-5 L/min) settings.
- Loading Constraints: Distribute stored items evenly across the five adjustable shelves to avoid overloading and maintain airflow.
- Door Operation: Keep the cabinet door closed during normal operation and minimize open duration to preserve low-humidity atmosphere.
- Component Protection: Protect the tempered-glass viewing doors, magnetic seals, and anti-static coating from impact or abrasive contact during movement.
Position the cabinet on a stable indoor surface and connect a regulated nitrogen supply. Configure the automatic dual-flow control to maintain the desired humidity range for moisture-sensitive materials.
Required Equipment: Regulated nitrogen supply line, Leveling feet adjustment tool, Humidity calibration device
- Install the Cabinet
Place the cabinet on a level indoor surface and adjust the leveling feet so the unit is stable and the door seals evenly. - Connect Nitrogen Supply
Attach the nitrogen line to the cabinet inlet, set the large-flow meter to 15-50 L/min and the small-flow meter to 1-5 L/min, then verify the gas supply is stable. - Set Humidity Control Range
Configure the software-controlled humidity target between 1% and 60% RH using the cabinet's control interface. - Load Materials
Distribute moisture-sensitive items evenly across the adjustable shelves, ensuring no blockage of the perforated airflow paths. - Close Door and Allow Recovery
Close the door fully and allow the automatic dual-flow system to restore the low-humidity atmosphere before next access. - Monitor Humidity Levels
Periodically check the displayed humidity reading and confirm the cabinet remains within the set range during extended storage.
How does the dual-flow nitrogen management system balance recovery speed and nitrogen consumption in the 1435L-4 cabinet?
The dual-flow system automatically switches between large-flow (15-50 L/min) for rapid atmosphere recovery after door opening and small-flow (1-5 L/min) for steady-state maintenance, reducing unnecessary nitrogen use while restoring low-humidity conditions quickly. This controlled switching logic is built into the cabinet's automatic software-based nitrogen management.
What anti-static features does the 1435L-4 cabinet provide for ESD-sensitive component storage?
The cabinet body is constructed from 1.2 mm galvanized steel with an anti-static exterior coating, making it suitable for electrostatic-control areas and ESD-sensitive material handling. The design includes tempered-glass viewing doors and magnetic sealing to maintain a controlled, low-humidity environment compatible with moisture-sensitive electronic parts and optical components.
What are the infrastructure requirements for installing the 1435L-4 dual-flow nitrogen cabinet?
The cabinet requires a stable indoor surface, even distribution of stored items across its 5 adjustable shelves, and a stable gas-supply connection capable of supporting the large-flow meter setting of 15-50 L/min and small-flow setting of 1-5 L/min. Before operation, verify stable gas-supply conditions, power connections, and door sealing to ensure proper low-humidity nitrogen-assisted storage.
The 1435L-4 dual-flow nitrogen cabinet provides 1435 L capacity with anti-static construction, automatic flow switching between 15-50 L/min and 1-5 L/min for rapid recovery and reduced nitrogen consumption, suitable for moisture-sensitive materials in ESD-controlled environments.
Positive
- Dual-flow automatic nitrogen switching: Automatically transitions between large-flow (15-50 L/min) and small-flow (1-5 L/min) operation, enabling fast recovery after door openings while minimizing unnecessary nitrogen consumption.
- Anti-static ESD-safe construction: 1.2 mm galvanized steel cabinet with anti-static exterior coating and tempered-glass viewing doors provides electrostatic protection for sensitive electronic and optical components.
Trade-offs
- Requires external nitrogen supply: Cabinet depends on a stable external nitrogen source and gas-supply infrastructure; operation is not possible without a continuous nitrogen feed, adding installation complexity.
- Installation and sealing verification needed: Level installation and door sealing must be verified after delivery to maintain humidity control; the large cabinet dimensions (1200×700×1860 mm) demand adequate floor space and careful handling.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
