|
35 L Constant Temperature Incubator with Touchscreen Control
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator must be operated within the specified ambient temperature range of +5 to +35°C and connected to a grounded AC 220V, 50 Hz power supply. Adequate clearance around the unit is required for ventilation and heat dissipation, and the unit must be kept upright during transport to prevent damage.
- Electrical Safety: Connect the incubator to a grounded power outlet matching the specified voltage and frequency to avoid electrical hazards.
- Thermal Management: Maintain at least 10 cm clearance on all sides for proper airflow and prevent overheating.
- Ambient Conditions: Operate only within +5 to +35°C ambient temperature to ensure stable performance and prevent component failure.
- Transport Orientation: Keep the incubator upright during transport and use appropriate lifting equipment to avoid damage to internal components.
- Accessibility: Keep all controls, sensors, and ports accessible for routine cleaning and maintenance.
Follow these steps to set up and operate the incubator for routine incubation workflows. Ensure all safety precautions are observed before use.
Required Equipment: Touchscreen controller, Shelves
- Inspect the incubator
Inspect the incubator for any visible damage after unpacking. - Position the incubator
Place the incubator on a level, non-flammable surface with at least 10 cm clearance on all sides. - Connect power
Connect the power cord to a grounded AC 220V, 50 Hz outlet. - Set parameters
Set the desired temperature and time parameters using the touchscreen controller. - Stabilize chamber
Allow the chamber to stabilize at the set temperature before loading samples. - Load samples
Load samples onto the shelves, ensuring they do not obstruct airflow. - Monitor operation
Monitor the display for any alarm indicators and confirm steady operation.
How uniform is the temperature inside the Atomfair AF-CTIN-035 35 L incubator at 37 °C?
At 37 °C, the AF-CTIN-035 maintains a temperature uniformity of ±1.5 °C and a temperature fluctuation of ±0.5 °C, with 0.1 °C resolution. Forced convection with an adjustable circulation fan is used to improve temperature response speed and chamber uniformity. These values apply to the 35 L working chamber of 340 × 320 × 320 mm.
Can the AF-CTIN-035 incubator be used below RT+5 °C or above 65 °C?
No. The AF-CTIN-035 is a constant-temperature incubator with a control range of RT + 5 to 65 °C and a working ambient temperature range of +5 to +35 °C. It is intended for routine incubation, sample holding, microbiology work, and general laboratory temperature control within that band; applications requiring lower-than-ambient or above-65 °C temperatures are outside the stated operating range.
What installation and power infrastructure should be confirmed before operating the AF-CTIN-035?
Before installation, verify available space against the 620 × 440 × 490 mm (W × D × H) external dimensions and confirm an AC 220 V, 50 Hz power supply with 200 W rated power. Keep the chamber, sensors, shelves, filters, doors, test ports, and control interfaces accessible for cleaning, inspection, and operation. During transport, keep the packed unit upright and use suitable lifting equipment to reduce movement and impact risk.
The 35 L constant temperature incubator (AF-CTIN-035) uses forced convection and touchscreen control for routine incubation, with a 35 L working volume, temperature range RT+5 to 65°C, and uniformity ±1.5°C at 37°C, suitable for general microbiology and sample holding workflows.
Positive
- Forced Convection Airflow: Forced convection design with adjustable circulation fan improves temperature uniformity and response speed, supporting repeatable incubation conditions.
- Touchscreen Multi-Step Controller: 4.3-inch intelligent touchscreen enables programmable temperature and time settings with multi-step capability, facilitating precise and repeatable protocol execution.
Trade-offs
- Limited Temperature Range and Uniformity: Temperature range of RT+5 to 65°C and uniformity of ±1.5°C at 37°C may not meet requirements for low-temperature or highly uniform incubation applications.
- Optional Over-Temperature Protection: Independent over-temperature controller is an optional accessory, not standard; laboratories requiring redundant safety monitoring must order separately.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
