|
Programmable LED Light Incubator, 300 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This document defines the environmental and electrical constraints for operating the Programmable LED Light Incubator, 300 L. It also specifies transport and maintenance access requirements necessary to avoid equipment damage or unsafe operation.
- Operating Environment: Operate the chamber only within a +5 to 30 C working environment to maintain specified performance.
- Electrical Supply: Connect the chamber to an AC 220 V, 50 Hz power supply with sufficient capacity for the 1700 W input.
- Transport Orientation: Keep the packed chamber upright and use suitable lifting equipment to prevent movement or impact damage during transport.
- Maintenance Access: Keep air inlets, exhaust paths, shelves, ports, doors and control interfaces accessible for cleaning and maintenance.
This procedure describes the initial placement, connection, and programming of the Programmable LED Light Incubator, 300 L. Follow these steps to prepare the chamber for controlled cultivation operation.
Required Equipment: suitable lifting equipment
- Confirm installation space
Confirm the installation space accommodates the stated external dimensions and allows access to air inlets and exhaust paths. - Move chamber upright
Move the packed chamber upright using suitable lifting equipment to avoid impact or movement damage. - Unpack and position chamber
Place the unpacked chamber in the confirmed installation space with shelves, ports, doors and control interfaces accessible. - Connect power supply
Connect the chamber to an AC 220 V, 50 Hz power supply with sufficient capacity for the 1700 W input. - Program controller
Set the multi-segment temperature, humidity, light intensity and time programs on the programmable controller before starting operation. - Start and monitor operation
Start the chamber and monitor for abnormal conditions using the wireless alarm or fault-display functions.
How does the lighting affect the temperature control range and uniformity in the Atomfair AF-M2B0300 300 L incubator?
The temperature control range shifts from 0 to 50 °C without lighting to 10 to 50 °C with lighting, due to heat generated by the LED lighting. Temperature fluctuation and uniformity is ±1 °C across the working volume. This trade-off is critical for applications requiring simultaneous high light intensity and low temperatures.
What CO2 control options are available for the 300 L programmable LED light incubator, and are they compatible with plant growth workflows?
An optional infrared CO2 sensor and controller can be added for specialized plant-growth workflows requiring precise CO2 enrichment. The system includes a CO2 inlet and infrared CO2 controller as optional accessories. When selected, the chamber uses an infrared CO2 sensor integrated with the programmable controller to maintain setpoints within the ±1 °C temperature uniformity and ±5-7% RH humidity deviation (no active humidity control stated).
What are the power supply and installation space requirements for the 300 L programmable LED light incubator?
The incubator requires a 1700 W, AC 220 V, 50 Hz power supply and must be operated in an ambient environment of +5 to 30 °C. The external dimensions are 830 x 850 x 1850 mm; ensure adequate clearance for air inlets, exhaust, and door access. Use suitable lifting equipment and keep the chamber upright during transport.
The AF-M2B0300 300 L programmable LED light incubator provides a 10–50 °C controlled range with lighting and 0–50 °C without, six-step LED illumination up to 28,000 lx, and a 30-segment programmable controller, supported by alternating dual compressors for long-duration stability. Its mirror-finish stainless-steel interior and optional CO2, communication, and alarm interfaces make it suited for plant growth, tissue culture, and BOD workflows, though it requires 1700 W power and careful installation-space planning.
Positive
- Alternating dual-compressor long-duration design: Two imported compressors automatically alternate to support continuous operation, enhancing low-temperature performance and stability for weeks-long cultivation or incubation programs.
- Programmable multi-segment environmental control: The controller allows independent setting of temperature, humidity, light intensity, and time across 30 segments, enabling repeatable climate simulation and multi-step stability studies.
Trade-offs
- High power and installation footprint: The unit requires a 1700 W AC 220 V/50 Hz supply and external dimensions of 830 x 850 x 1850 mm, demanding dedicated lab space and electrical infrastructure.
- No active humidity control in base configuration: This configuration lacks active humidity control, with deviation of ±5–7%RH, limiting precise humidity-dependent applications unless optional accessories are added.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
