Sintered Porous Titanium Foam Sheet 100μm ATOMFAIR®

$210.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered porous titanium foam sheet, 100 μm filtration, 20 PPI, 160 × 160 × 10 mm, 35–45% porosity, ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 10 mm, 20 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 100 µm filtration rating with a 20 PPI cellular structure in a 160 × 160 × 10 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 1.27 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 160 × 160 × 10 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T20-D10100
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	100 µm
Sheet Size	160 × 160 × 10 mm
Thickness	10 mm
Pore Density	20 PPI
Approximate Cell Spacing	1.27 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

100 µm filtration precision paired with a 20 PPI porous-cell structure.
160 × 160 × 10 mm sheet supplied as one piece.
Cell spacing is approximately 1.27 mm for the 20 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 100 µm, 20 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 160 × 160 × 10 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This sintered titanium sheet must be handled to prevent crushing, contamination, and thermal exposure above its recommended limit. Installation requires verification of media compatibility, operating pressure, temperature, flow, and dimensional tolerance.

Surface Protection: Protect the porous surface from crushing and contamination during handling, installation, and storage.
Media Compatibility Review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
Service Temperature Limit: Do not exceed the recommended service temperature of 300°C during operation.
Cleaning Constraints: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
Assembly Modification: Cutting, welding, and basic machining are acceptable for assembly integration when performed on the metallic porous structure.

HowTo

Handle, install, and clean the sintered titanium sheet without damaging its porous structure. Follow compatibility and thermal checks before putting the sheet into service.

Required Equipment: Backflushing apparatus, Steam cleaning equipment, Ultrasonic cleaner, Chemical cleaning equipment

Inspect the sheet
Inspect the sheet for visible damage, contamination, or blocked pores before installation.
Confirm compatibility
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance against the intended assembly requirements.
Verify product match
Verify filtration rating, PPI, and sheet dimensions match the target assembly before installation.
Protect porous surfaces
Protect the porous structure from crushing and contamination during positioning and installation.
Clean using compatible methods
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical procedures according to the process medium.
Verify thermal limit
Verify that the service temperature remains at or below 300°C during operation.

FAQ

How do the 20 PPI pore density and 100 µm filtration rating interact in this sintered titanium foam sheet?

The 20 PPI (pores per inch) specifies the cellular structure with approximately 1.27 mm cell spacing and 35–45% porosity, while the 100 µm rating denotes particle retention size. Together they balance low flow resistance with precise solid-liquid or gas-solid separation; both values must be reviewed together when matching the sheet to an assembly.

What is the maximum operating temperature for this titanium foam sheet, and can it be machined for integration into existing assemblies?

The recommended service temperature is ≤300°C. The titanium-based structure supports cutting, welding, and basic machining for assembly integration, but the porous surface must be protected from crushing and contamination during fabrication.

What cleaning methods are recommended for this sintered porous titanium sheet to maintain filtration performance?

Cleaning options include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The appropriate method depends on the process medium and operating procedure; backflushing suits reversible clogging, while ultrasonic cleaning is effective for stubborn contaminants.

Assessment

This sintered porous titanium foam sheet combines a 100 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity in a 160 × 160 × 10 mm format. Evaluation covers its separation characteristics, ≤300°C service temperature limit, and handling/cleaning constraints for lab and engineered filtration deployment.

Positive

Interconnected porosity with low flow resistance: The 35–45% porosity network with approximately 1.27 mm cell spacing preserves open through-paths for liquids and gases, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance, corrosion resistance, heat tolerance, and cleanability/reuse in compatible process conditions.
Machinable metallic structure for assembly integration: The sintered titanium framework can be cut, welded, and basic-machined, allowing the 160 × 160 × 10 mm sheet to be integrated into engineered filtration housings and laboratory assemblies.

Trade-offs

Maximum recommended service temperature 300°C: Recommended service temperature is limited to ≤300°C, so higher-temperature process streams require material-grade and thermal-performance review before deployment.
Porous surface requires careful handling: The sheet must be protected from crushing and contamination, and cleaning must be selected from backflushing, steam, ultrasonic, or compatible chemical procedures based on the process medium and operating procedure.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).