|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 200 × 200 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must not exceed 300°C recommended service temperature to avoid structural degradation. Media compatibility, operating pressure, and temperature must be confirmed before installation to prevent corrosion or failure.
- Handling Constraint: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning Constraint: Select backflushing, steam, ultrasonic, or chemical cleaning methods according to the process medium and operating procedure.
- Integration Constraint: Cutting, welding, and basic machining are permitted for assembly integration but must avoid compromising the porous structure.
Inspect the sheet for damage before installation and confirm dimensional fit within the 200 × 200 × 3 mm envelope. Clean the sheet using the appropriate method after each process cycle to maintain filtration performance.
Required Equipment: Ultrasonic cleaner, Backflushing system, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Confirm compatibility
Confirm that the operating temperature does not exceed 300°C and that the media is compatible with titanium. - Install the sheet
Install the sheet into the filtration assembly, ensuring the 200 × 200 × 3 mm envelope fits without crushing the porous surface. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean after use
Clean the sheet after each process cycle to remove retained solids and restore flow paths.
How does the 20 PPI cellular structure relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 20 PPI (pores per inch) describes the cellular structure's pore density, while the 100 µm filtration rating indicates the particle size retention. The sheet has a cell spacing of approximately 1.27 mm and a porosity of 35-45%, which together create interconnected flow paths that achieve the stated filtration precision. Both parameters should be reviewed together when matching the sheet to an assembly.
What are the recommended service temperature and cleaning methods for this porous titanium foam sheet?
The recommended service temperature is ≤300°C. Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium. The porous surface should be protected from crushing and contamination during cleaning and handling.
Can this sintered titanium foam sheet be machined or integrated into existing assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The sheet is supplied as a 200×200×3 mm piece, but custom dimensions are available upon consultation. Dimensional tolerance should be reviewed before installation to ensure proper fit and performance.
This 200×200×3 mm sintered titanium foam sheet combines a 100 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, enabling solid-liquid, gas-solid, and gas-liquid separation in a machinable metallic format; deployment requires confirming media compatibility, operating limits, and surface-protective handling.
Positive
- Interconnected porous titanium network: The sintered 35–45% porous structure provides interconnected through-pore pathways with approximately 1.27 mm cell spacing, supporting 100 µm filtration at low flow resistance for liquid and gas separation applications.
- Corrosion-resistant and machinable construction: The titanium-based porous sheet offers corrosion resistance and thermal stability in compatible media and can be cut, welded, or machined to integrate into filtration assemblies.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require alternative media or design review before installation.
- Porous surface vulnerable to crushing and contamination: The 3 mm porous sheet must be protected from surface crushing and contamination; cleaning via backflushing, steam, ultrasonic, or compatible chemical methods must be matched to the process medium.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
