|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines handling and compatibility constraints for the sintered porous titanium foam sheet. Confirmation of media compatibility, operating pressure, temperature, target flow, and dimensional tolerance is required before installation.
- Media and operating compatibility: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Surface protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Thermal service limit: Keep the service temperature at or below 300°C to remain within the recommended operating limit.
- Cleaning procedure selection: Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Assembly matching: Review both PPI and micron filtration values together when matching the sheet to an assembly.
Confirm the sheet's filtration rating, PPI, dimensions, material grade, and media compatibility before assembly. Protect the porous surface throughout handling and select a cleaning method that matches the process medium and operating procedure.
Required Equipment: Filtration assembly, Cleaning apparatus
- Inspect the sheet
Inspect the sheet for surface crushing or contamination before use. - Confirm compatibility
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance with the process assembly. - Match filtration values
Match the sheet to the assembly by reviewing both PPI and micron filtration values together. - Protect the porous surface
Protect the porous surface from crushing and contamination while mounting the sheet. - Select a cleaning method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
How does the 110 PPI pore density relate to the 50 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure density, while the 50 µm value specifies the filtration precision. The two parameters are independent but must be matched together for the intended separation task. For this sheet, the 110 PPI structure yields approximately 0.23 mm cell spacing and 35–45% porosity, supporting the 50 µm filtration rating while maintaining interconnected flow paths.
What is the maximum recommended service temperature for this 50 µm titanium foam sheet, and how does it affect its use in high-temperature filtration?
The maximum recommended service temperature is ≤300°C. Above this temperature, the titanium porous structure may degrade or lose mechanical integrity. For applications such as gas purification or catalyst recovery at elevated temperatures, the operating temperature must be confirmed within this limit to ensure stable performance.
What cleaning methods are recommended for this 50 µm sintered titanium foam sheet to avoid damaging the porous structure?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during cleaning. The metallic construction supports these methods without compromising the 35–45% porosity or the 50 µm filtration rating.
This 160 × 160 × 5 mm sintered titanium foam sheet combines a 50 µm filtration rating with a 110 PPI cellular structure, offering 35–45% porosity and an estimated bulk density of 2.48–2.93 g/cm³ for low-resistance, corrosion-tolerant separation in laboratory and engineered filtration assemblies.
Positive
- Interconnected porous structure with 35–45% porosity: The sintered titanium framework provides interconnected through-pores with 35–45% porosity and approximately 0.23 mm cell spacing, supporting stable separation and controlled flow for solid-liquid, gas-solid, and gas-liquid applications.
- Corrosion resistance and thermal stability up to 300°C: Titanium-based construction offers corrosion resistance and heat tolerance in compatible media, with a recommended service temperature of ≤300°C, enabling use in chemical, petrochemical, and pharmaceutical process filtration.
Trade-offs
- Surface vulnerable to crushing and contamination: The porous surface must be protected from crushing and contamination during handling; cleaning via backflushing, steam, ultrasonic, or chemical methods must be matched to the process medium to avoid damage.
- Requires pre-installation compatibility review: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before installation, as the sheet's performance is dependent on these process-specific parameters.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
