|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet is a passive porous-metal filtration medium with defined thermal, handling, and compatibility limits. It must be protected from crushing and contamination and matched to the process medium before installation.
- Service temperature limit: Do not expose the sheet to service temperatures above 300°C.
- Media compatibility review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Surface protection requirement: Protect the porous surface from crushing and contamination during handling, installation, and cleaning.
- Cleaning method selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Configuration review: Confirm both the PPI cellular structure and the micrometre filtration rating together when matching the sheet to an assembly.
Confirm application parameters before installation and protect the porous surface from damage. Clean the sheet after use with a method matched to the process medium.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic cleaning bath, Chemical cleaning reagents
- Confirm application parameters
Confirm the required filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Inspect the sheet
Inspect the sintered titanium sheet for visible damage or contamination before placing it into the assembly. - Install and protect the porous surface
Install the sheet into the filtration assembly while protecting the porous surface from crushing and contamination. - Select the cleaning method
Select a cleaning method from backflushing, steam, ultrasonic, or compatible chemical procedures based on the process medium. - Clean the sheet
Clean the sheet using the selected method and the operating procedure appropriate for the process medium. - Verify before reuse
Verify that the cleaned sheet retains its filtration rating and structural integrity before reuse.
How does the 30 PPI cellular structure relate to the 50 µm filtration rating for this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure with an approximate cell spacing of 0.85 mm, while the 50 µm value specifies the filtration precision. These are independent parameters: PPI defines the macro-porous framework, and the micrometre rating defines the particle retention size. Both must be reviewed together when matching the sheet to an assembly, as stated in the product configuration note.
What are the maximum operating temperature and media compatibility considerations for this 50 µm sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility must be reviewed before quotation or installation because corrosion resistance depends on the specific process medium. The sheet is made from titanium or titanium alloy, providing corrosion resistance in compatible media, but operating pressure, temperature, and target flow should also be confirmed.
What cleaning and handling procedures are recommended for maintaining the 160 × 160 × 5 mm sintered titanium foam sheet?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The metallic construction can support cutting, welding, and basic machining for assembly integration, but care must be taken to avoid clogging or damaging the porous structure.
This sintered porous titanium foam sheet offers 50 µm filtration precision with 30 PPI cellular structure, providing low flow resistance and corrosion resistance suitable for lab-scale and engineered filtration assemblies, but requires careful handling and temperature management below 300°C.
Positive
- Interconnected porous flow paths: The 35–45% porosity with ~0.85 mm cell spacing creates interconnected passages that enable low flow resistance and efficient solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion and thermal resistance: Titanium-based construction provides corrosion resistance in compatible media and thermal stability up to 300°C, supporting cleanability and reuse in demanding filtration applications.
Trade-offs
- Temperature limit of 300°C: Recommended service temperature is ≤300°C, which restricts use in high-temperature processes above this threshold.
- Surface sensitivity to crushing: The porous surface must be protected from crushing and contamination during handling, installation, and cleaning to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
