|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 100 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet is constrained by a maximum service temperature of 300°C and requires protection from crushing and contamination during handling. Media compatibility, operating pressure, temperature, and flow rate must be verified before installation to prevent premature failure.
- Maximum Service Temperature: Do not exceed 300°C to avoid structural degradation of the porous titanium matrix.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure to avoid damage.
- System Compatibility Review: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before quotation or installation.
- Filtration Precision and PPI: Review both the PPI value and the micrometre filtration rating together to ensure proper matching with the assembly.
This procedure describes the essential steps for handling, cleaning, and installing the sintered titanium foam sheet to maintain its performance. Follow these steps to avoid damage and ensure proper integration into filtration assemblies.
Required Equipment: Ultrasonic cleaner, Backflushing system, Steam cleaner, Chemical cleaning agents
- Inspect the sheet
Inspect the sheet for visible damage, such as cracks or crushed pores, before installation. - Protect the surface
Protect the porous surface from contamination and crushing during handling by using clean gloves and a soft support. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods as appropriate for the process medium. - Confirm system compatibility
Confirm the filtration rating, PPI, sheet dimensions, material grade, and operating conditions before integrating into the assembly. - Install the sheet
Install the sheet in the filtration assembly, ensuring proper sealing and support to prevent deformation.
How does the 20 PPI cellular structure relate to the 50 µm filtration rating on this sintered titanium sheet?
The 20 PPI (pores per inch) defines the cellular structure's pore density, while the 50 µm filtration rating specifies the particle size cutoff. The sheet's 35–45% porosity and approximately 1.27 mm cell spacing provide interconnected pathways that support solid-liquid, gas-solid and gas-liquid separation. Both parameters must be reviewed together when matching the sheet to an assembly, as PPI influences flow and structural properties while filtration rating determines particle retention.
Can this sintered titanium foam sheet be machined or welded into custom shapes for assembly integration?
Yes, the metallic titanium construction can support cutting, welding and basic machining for assembly integration. The sheet is supplied as a 100 × 100 × 3 mm piece, and custom dimensions are available upon consultation. Handling instructions recommend protecting the porous surface from crushing during any modification.
What cleaning methods are recommended for this 50 µm porous titanium sheet to maintain its filtration performance?
Recommended cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination during cleaning. The sheet's titanium construction provides corrosion resistance, allowing repeated cleaning cycles without degrading the structure.
This 50 µm, 20 PPI sintered titanium foam sheet (100 × 100 × 3 mm) offers a corrosion-resistant, cleanable porous metal medium for solid-liquid and gas separation, with a 35–45% porosity and 1.27 mm cell spacing that balances flow and filtration precision, though its 300°C service limit and sensitivity to surface crushing require careful process integration.
Positive
- Corrosion-resistant titanium construction: The titanium and titanium-alloy base provides corrosion resistance and thermal stability in compatible media, enabling use in aggressive chemical, petrochemical, and seawater environments without rapid degradation.
- Cleanable and reusable porous structure: The interconnected open-pore framework supports backflushing, steam, ultrasonic, and chemical cleaning procedures, allowing the sheet to be regenerated and reused in compatible process conditions, reducing replacement frequency.
Trade-offs
- Limited service temperature of 300°C: The recommended maximum service temperature is 300°C, which restricts deployment in high-temperature filtration or thermal-management applications exceeding this threshold without material degradation.
- Porous surface vulnerable to crushing: The porous titanium surface must be protected from crushing and contamination during handling and installation, as mechanical deformation can permanently block flow paths and compromise filtration performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
