|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 200 × 200 × 2.8 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet tolerates service temperatures up to 300°C and is cleanable by backflushing, steam, ultrasonic, or compatible chemical procedures. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation or quotation.
- Thermal limit: Keep the sheet at or below a 300°C recommended service temperature in the intended process stream.
- Media compatibility: Confirm compatibility of the porous titanium structure with the process medium before installation.
- Mechanical protection: Protect the porous surface from crushing and contamination during handling and assembly.
- Cleaning selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
- Configuration verification: Review PPI and filtration rating together when matching the sheet to an assembly.
Confirm operating and compatibility parameters before use, then protect the porous structure during handling. Clean the sheet with a method matched to the process medium.
- Verify compatibility and operating conditions
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select the cleaning method
Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
What is the relationship between the 110 PPI pore density and the 50 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI value describes the cellular structure (pore density), while the 50 µm value describes the filtration precision. Both parameters must be reviewed together when matching the sheet to an assembly, as they reflect different physical characteristics: the foam's open-cell density and the effective particle retention size.
Can this sintered titanium foam sheet be welded or machined for integration into an existing filtration assembly?
Yes, the metallic titanium construction supports cutting, welding, and basic machining for assembly integration. This allows the 200 × 200 × 2.8 mm sheet to be adapted into custom housings or modules, provided the porous structure is protected from crushing and contamination during processing.
What cleaning methods are recommended for this porous titanium foam sheet to maintain performance and avoid damage?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during cleaning. The appropriate method depends on the process medium and operating procedure, and the sheet's corrosion resistance and thermal stability (≤300°C) support repeated cleaning cycles.
This 200 × 200 × 2.8 mm sintered titanium foam sheet combines a 50 µm filtration rating with a 110 PPI interconnected cell structure at 35–45% porosity, supporting solid-liquid, gas-solid and gas-liquid separation with low flow resistance. The evaluation also accounts for its corrosion-resistant, cleanable titanium matrix and the media-compatibility, pressure, temperature and handling checks required before installation.
Positive
- 50 µm rating with 110 PPI open-cell structure: The sheet pairs a 50 µm filtration rating with a 110 PPI interconnected titanium framework at 35–45% porosity and approximately 0.23 mm cell spacing, giving stable separation and low flow resistance for solid-liquid, gas-solid and gas-liquid processes.
- Corrosion-resistant, cleanable titanium matrix: The sintered titanium construction provides corrosion resistance and thermal stability in compatible media, and the sheet can be reclaimed by backflushing, steam, ultrasonic or compatible chemical cleaning.
Trade-offs
- Application parameters must be validated: Media compatibility, operating pressure, temperature, target flow and dimensional tolerance must be reviewed before quotation or installation, and recommended service temperature is limited to ≤300°C.
- Porous surface requires handling protection: The porous surface must be protected from crushing and contamination, and the cleaning method — backflushing, steam, ultrasonic or chemical — has to be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
