|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 160 × 160 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium foam sheet requires controlled handling and compatibility review before installation. Its porous metallic structure can be damaged by crushing, contamination, or excessive service temperature if process limits are not observed.
- Compatibility review: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before installation.
- Thermal limit: Do not operate the sheet above the recommended service temperature of 300°C.
- Handling protection: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning compatibility: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Mechanical integration: Assembly integration may involve cutting, welding, or basic machining of the metallic sheet.
This procedure covers compatibility verification, handling protection, mechanical integration, and cleaning of a sintered porous titanium foam sheet. Follow the steps in order to preserve pore integrity and filtration characteristics.
Required Equipment: Backflushing system, Steam cleaner, Ultrasonic bath
- Verify compatibility
Verify filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility against the planned assembly before installation. - Protect porous surface
Protect the porous surface from crushing and contamination during handling and storage. - Integrate mechanically
Cut, weld, or machine the sheet for assembly integration. - Clean the sheet
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical procedures according to the process medium and operating procedure.
How does the 30 µm filtration rating relate to the 30 PPI cellular structure of this sintered titanium foam sheet?
The 30 µm filtration rating and 30 PPI pore density describe two independent parameters: the micrometre value specifies the filtration precision (particle retention size), while PPI defines the cellular structure of the porous foam. For this sheet, the 30 PPI structure yields an approximate cell spacing of 0.85 mm and a porosity of 35–45%, with interconnected through-pores that support the 30 µm filtration capability. Both values must be reviewed together when matching the sheet to a specific separation assembly, as the PPI influences flow distribution and mechanical strength, while the filtration rating determines the particle cut-off size.
What are the mechanical handling and fabrication constraints for this 160 × 160 × 10 mm titanium foam sheet?
The sintered titanium sheet can be cut, welded, and subjected to basic machining for integration into assemblies, as stated in the product description. However, the porous surface must be protected from crushing and contamination during handling and fabrication, because the 35–45% porosity and interconnected pore structure can be permanently deformed under excessive point load. No specific maximum load or machining speed is provided, so standard care for porous metallic media should be applied, and the sheet should be supported evenly during any cutting or welding operations.
Which cleaning methods are compatible with this sintered porous titanium foam sheet?
Backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures are all listed as acceptable cleaning methods for this titanium foam sheet. The choice of method should be based on the process medium and the operating procedure, as stated in the handling and cleaning notes. These options allow the sheet to be reused in compatible filtration applications, provided the porous surface is protected from contamination and physical damage during cleaning.
This sintered titanium foam sheet pairs a 30 µm filtration rating with a 30 PPI cellular structure in a 160 × 160 × 10 mm format, offering corrosion-resistant, cleanable porous media for liquid/gas separation; deployment is constrained by a 300°C service ceiling and crush-sensitive surface handling.
Positive
- 30 µm Filtration with 30 PPI Cell Structure: The 30 µm rating is paired with a 30 PPI cellular structure and approximately 0.85 mm cell spacing, with 35–45% porosity providing interconnected passages for solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-Resistant, Cleanable Metallic Construction: Titanium and titanium-alloy construction provides corrosion resistance and thermal stability in compatible media. The metallic structure supports cutting, welding, basic machining, and cleaning by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- 300°C Service Temperature Ceiling: Recommended service temperature is specified as ≤300°C. Thermal exposure beyond this limit must be evaluated before the sheet is selected for a process.
- Porous Surface Requires Crush and Contamination Protection: The porous surface must be protected from crushing and contamination during handling. Cleaning should be chosen from backflushing, steam, ultrasonic, or compatible chemical methods based on the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
