|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 120 × 120 × 20 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered porous titanium sheet is stable in compatible media up to a 300°C service temperature. Its porous structure must be protected from crushing, contamination, and incompatible process conditions.
- Service temperature limit: Do not expose the sheet to service temperatures above 300°C.
- Mechanical handling: Protect the porous surface from crushing and contamination during handling and installation.
- Media compatibility review: Review media compatibility, operating pressure, temperature, and target flow before installation.
- Cleaning compatibility: Select a backflushing, steam, ultrasonic, or compatible chemical cleaning method according to the process medium and operating procedure.
- Assembly integration: Cutting, welding, and basic machining are permitted for assembly integration in compatible process conditions.
Use this procedure when handling, installing, or cleaning the sintered porous titanium sheet. Select the cleaning method according to the process medium and operating conditions.
- Inspect before handling
Inspect the sheet for visible contamination, deformation, or damage before handling or installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during transfer and installation. - Confirm compatibility
Confirm media compatibility, service temperature, and filtration rating with the intended assembly before installation. - Select a cleaning method
Choose a backflushing, steam, ultrasonic, or compatible chemical cleaning method based on the process medium and operating procedure. - Clean the sheet
Clean the sheet according to the selected method while keeping the porous surface protected from contamination and deformation.
How do the 20 µm filtration rating and 20 PPI pore density relate in this sintered titanium foam sheet?
The 20 µm filtration rating defines the particle size cutoff, while the 20 PPI (pores per inch) describes the cellular structure's porosity and flow characteristics. According to the product specification, these two values are distinct and should be reviewed together when matching the sheet to an assembly. The 20 PPI structure yields an approximate cell spacing of 1.27 mm and a porosity of 35–45%, supporting the 20 µm filtration precision.
What is the maximum recommended service temperature for this porous titanium sheet?
The recommended service temperature is ≤300°C, as stated in the technical specifications. This is based on the titanium material's stability under high-vacuum sintering. However, media compatibility, operating pressure, and other factors should be reviewed before installation.
What cleaning methods are recommended for the sintered titanium foam sheet?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling to maintain filtration performance.
This 20 µm, 20 PPI sintered porous titanium foam sheet in a 120 × 120 × 20 mm format provides an interconnected 35–45% porosity structure for filtration and flow-distribution work, with titanium-based corrosion resistance and a ≤300°C service recommendation. Operating pressure, temperature, media compatibility, target flow, and dimensional fit must be confirmed before installation.
Positive
- Interconnected 35–45% porosity with 20 µm precision: The sintered titanium framework contains interconnected passages with 35–45% porosity and approximately 1.27 mm cell spacing, supporting solid-liquid, gas-solid, and gas-liquid separation while delivering a 20 µm filtration rating.
- Corrosion-resistant, cleanable metallic media: Titanium/titanium-alloy construction provides corrosion resistance and heat tolerance up to 300°C, and the porous structure can be reused after backflushing, steam, ultrasonic, or compatible chemical cleaning.
Trade-offs
- Service temperature capped at 300°C: The recommended service temperature is ≤300°C, so higher-temperature process streams exceed the stated operating envelope and require separate evaluation.
- Porous surface needs crush and contamination protection: The porous surface must be protected from crushing and contamination, and cleaning procedures must be selected according to the process medium to avoid compromising the 20 µm/20 PPI structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
