|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 2 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium sheet requires protection from physical crushing and contamination during handling and storage. Media compatibility, operating pressure, temperature, and flow conditions must be verified before installation to ensure stable performance.
- Handling Protection: Protect the porous surface from crushing forces and contamination to maintain filtration integrity.
- Thermal Limit: Service temperature must not exceed 300°C to prevent structural degradation of the sintered titanium framework.
- Media Compatibility: Confirm chemical compatibility of the process fluid with titanium to avoid corrosion or fouling.
- Cleaning Procedures: Use backflushing, steam, ultrasonic, or compatible chemical cleaning methods based on the process medium and operating procedure.
- Machining Options: The metallic sheet can be cut, welded, or machined for custom assembly integration, but avoid damaging the porous structure.
What is the relationship between the 110 PPI pore density and the 20 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure with an approximate cell spacing of 0.23 mm, while the 20 µm value specifies the filtration precision. The product's general filtration range is 0.45–100 µm and general pore-size range is 2.5–160 µm, so the 20 µm rating is a selected point within that capability. Both parameters must be reviewed together when matching the sheet to an assembly.
Can this 200 × 200 × 2 mm porous titanium sheet be welded or machined for integration into an existing filtration assembly?
Yes, the metallic titanium construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling and fabrication. Compatible cleaning methods include backflushing, steam, ultrasonic, and chemical procedures depending on the process medium.
What are the maximum service temperature and recommended cleaning procedures for this sintered titanium foam filter?
The recommended service temperature is ≤300°C. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical cleaning, chosen according to the process medium and operating procedure. The porous surface should be protected from crushing and contamination to maintain performance.
This 200 × 200 × 2 mm sintered porous titanium sheet delivers a 20 µm filtration rating in a 110 PPI structure with 35–45% porosity and 0.23 mm cell spacing, supporting corrosion-resistant, cleanable liquid and gas separation; deployment should respect the ≤300 °C service ceiling and include handling safeguards for the porous surface.
Positive
- 20 µm filtration with 110 PPI cellular structure: The sheet combines a 20 µm filtration rating with a 110 PPI porous cell structure and 35–45% porosity, enabling interconnected flow paths for solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant, cleanable sintered titanium matrix: The titanium framework provides corrosion resistance and thermal stability in compatible media, and cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300 °C: The recommended service temperature is ≤300 °C, so higher-temperature process streams would exceed the stated operating envelope and require engineering review before installation.
- Porous surface requires handling protection: The 2 mm sheet's porous surface must be protected from crushing and contamination, and cleaning method selection must match the process medium using backflushing, steam, ultrasonic, or compatible chemical procedures.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
