Porous Titanium Foam Sheet 10μm 20 PPI 100×100×3mm ATOMFAIR®

$90.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet, 100 × 100 × 3 mm, 10 μm filtration, 20 PPI, 35–45% porosity, for lab separation assemblies. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 100 × 3 mm, 20 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 10 µm filtration rating with a 20 PPI cellular structure in a 100 × 100 × 3 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 1.27 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 100 × 100 × 3 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T20-A0310
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	10 µm
Sheet Size	100 × 100 × 3 mm
Thickness	3 mm
Pore Density	20 PPI
Approximate Cell Spacing	1.27 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	5 × 10^-5 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

10 µm filtration precision paired with a 20 PPI porous-cell structure.
100 × 100 × 3 mm sheet supplied as one piece.
Cell spacing is approximately 1.27 mm for the 20 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 10 µm, 20 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 100 × 100 × 3 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This sintered titanium foam sheet must be used within a recommended service temperature of ≤300°C to avoid structural degradation. The open-pore structure requires protection from crushing and contamination, and media compatibility must be verified before installation.

Temperature Limit: Do not exceed 300°C during service to prevent material degradation.
Handling Precaution: Protect the porous surface from crushing and contamination to maintain filtration integrity.
Cleaning Procedure: Use backflushing, steam, ultrasonic, or compatible chemical methods for cleaning based on the process medium.
Machining Allowance: Cutting, welding, and basic machining are permissible for assembly integration if performed carefully.
Compatibility Verification: Verify media compatibility, operating pressure, and temperature before installation to avoid failure.

FAQ

How does the 10 µm filtration rating relate to the 20 PPI pore density in this sintered titanium foam sheet?

The 10 µm filtration rating specifies the particle retention size, while the 20 PPI (pores per inch) describes the cellular structure’s pore density. The product combines both to provide a 35–45% porosity with interconnected flow paths, a relative air permeability of 5 × 10⁻⁵ L/(cm²·min·Pa), and a general filtration range of 0.45–100 µm. PPI governs the mechanical and flow characteristics, and the micron rating determines filtration precision; both must be matched together for the intended assembly.

What are the recommended service temperature limit and cleaning procedures for this porous titanium sheet?

The recommended service temperature is ≤300°C. Cleaning can be performed by backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The titanium construction provides corrosion resistance and thermal stability within these conditions.

What handling precautions are required to prevent damage to the sintered titanium foam sheet?

The porous surface must be protected from crushing and contamination during handling and storage. The sheet can be cut, welded, or machined for assembly integration, but care should be taken to avoid deforming the 1.27 mm cell-spacing structure. Cleaning should be selected based on the process medium to maintain the interconnected porous pathways.

Assessment

This 100 × 100 × 3 mm sintered titanium foam sheet combines a 10 µm filtration rating with a 20 PPI cellular structure and 35–45% porosity, providing an interconnected, corrosion-resistant porous medium for lab-scale filtration and engineered separation assemblies. Operating fit must be verified against media compatibility, pressure, temperature, flow, and dimensional tolerance before installation.

Positive

Interconnected porous titanium network: High-vacuum sintered titanium construction provides 35–45% porosity with interconnected passages, supporting low flow resistance and enabling solid-liquid, gas-solid, and gas-liquid separation in a 10 µm rated sheet.
Corrosion-resistant and cleanable media: The titanium-based porous structure offers corrosion resistance and thermal stability in compatible media, and the metallic sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.

Trade-offs

Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require alternate media selection or explicit engineering review before installation.
Porous surface handling sensitivity: The porous surface must be protected from crushing and contamination, and cleaning method must be selected according to the process medium and operating procedure to preserve filtration performance.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).