1435L-6 Anti-Oxidation Nitrogen Cabinet, Anti-Static Cabinet BodyResearch-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
For bulk orders, configuration review, accessory matching or application-specific guidance, contact our engineering sales team.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This cabinet requires stable indoor placement, a regulated nitrogen supply, and continuous power for humidity control. Door sealing must be maintained during operation to prevent humidity ingress and maintain inert atmosphere.
- Installation Surface Requirements: The cabinet must be placed on a level, stable indoor surface to ensure proper door sealing and structural integrity.
- Nitrogen Supply Requirements: A nitrogen supply with adjustable flow rate between 0 and 50 L/min is required to maintain the controlled low-humidity atmosphere.
- Door Sealing Integrity: The magnetic door seals must be inspected regularly to prevent ambient moisture from entering the cabinet and degrading the nitrogen atmosphere.
- Sensor Calibration Drift: The Honeywell temperature and humidity sensor exhibits an annual drift of 0.3% RH, requiring periodic recalibration to maintain indication accuracy.
- Electrostatic Protection: The anti-static cabinet body must be properly grounded to prevent electrostatic discharge damage to stored ESD-sensitive materials.
This procedure describes the installation and initial configuration of the nitrogen cabinet for oxidation-sensitive storage. Follow these steps to establish a stable inert atmosphere and ensure proper handling of stored materials.
- Install Cabinet
Install the cabinet on a level, stable indoor surface near the nitrogen supply and electrical outlet. - Connect Nitrogen Supply
Connect the nitrogen supply to the cabinet's gas inlet and adjust the flow control knob to the desired rate between 0 and 50 L/min. - Verify Door Seals
Verify that the door seals are intact and close the door to initiate the humidity control process. - Distribute Stored Materials
Distribute stored materials evenly across the adjustable shelves to allow uniform nitrogen circulation and prevent overloading. - Maintain Closed Operation
Keep the cabinet door closed during normal use and monitor the humidity display to ensure the setpoint is maintained.
How does the optional electronic dehumidification module affect nitrogen consumption in the 1435L-6 anti-oxidation nitrogen cabinet?
The optional electronic dehumidification module operates together with the gas-filling unit to reduce nitrogen usage. This hybrid configuration enables the cabinet to maintain the 1%–60% RH humidity control range with lower continuous nitrogen flow (0–50 L/min adjustable), thereby conserving nitrogen during routine operation. The standard configuration relies solely on nitrogen purge; adding the module is advised for applications prioritizing nitrogen efficiency.
Can the 1435L-6 cabinet with anti-static body be used in ISO-classified cleanroom environments?
The standard cabinet body uses 1.2 mm galvanized steel with an anti-static exterior coating, designed for ESD-sensitive material handling and general laboratory use. It is not explicitly rated for cleanroom particle control. For environments requiring stricter cleanliness, a stainless steel cabinet-body upgrade is available as an optional item. Consult the manufacturer to confirm compatibility with specific cleanroom classifications.
What gas supply and power infrastructure is required for the 1435L-6 anti-oxidation nitrogen cabinet?
The cabinet requires a stable nitrogen supply with flow adjustable from 0 to 50 L/min and standard electrical power for the fully automatic computer control system. Install the unit on a stable indoor surface with leveling per the handling instructions. Verify stable gas-supply conditions and confirm all utility connections (power and gas) before formal operation.
Atomfair 1435L-6 anti-oxidation nitrogen cabinet offers 1435 L capacity with anti-static body, Honeywell humidity sensor, and adjustable nitrogen flow for controlled storage of oxidation-sensitive materials, but requires external nitrogen supply and optional alarm for full monitoring.
Positive
- Precise humidity control with low drift: Honeywell sensor provides ±3% RH accuracy and 0.3% annual drift, enabling reliable long-term low-humidity storage conditions.
- Anti-static cabinet construction: 1.2 mm galvanized steel with anti-static coating and tempered-glass doors protect ESD-sensitive components during storage and handling.
Trade-offs
- Requires external nitrogen supply: The cabinet relies on a stable nitrogen source with 0-50 L/min flow adjustment; users must verify gas-supply conditions before operation.
- Over-humidity alarm is optional: The over-humidity alarm feature is not standard and must be specified separately, potentially delaying response to humidity excursions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
