Top-Light LCD Incubator 70 Litre, AF-GZX70T, ATOMFAIR®

Top-Light Incubator, 70 L

Research-grade laboratory product

Product Overview

Top-Light Incubator, 70 L is a practical chamber for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection. It brings together 70 l of usable space, 5 to 60 C and 0 to 10000 lux (6 levels) illumination, so the chamber can keep samples in a steady, repeatable working condition.

The cabinet combines a visible glass inner door, cleanable stainless-steel surfaces and a top-light layout to make sample observation and chamber maintenance easier. The cabinet uses a mirror-finish stainless-steel inner chamber, a tempered-glass inner door, a cold-rolled steel exterior and top lighting, with an internal working room of 350 x 400 x 500 mm and an external footprint of 575 x 555 x 1170 mm. That combination of chamber size, shell build and liner material makes the unit easier to place, clean and use in routine laboratory work.

The family uses programmable temperature and light control to support plant-growth experiments and routine illuminated incubation. The stated input power is 400 W, and the timer range is 0 to 9999 min. It is well suited to the day-to-day work listed above, including culture, incubation, climate simulation or illuminated growth tasks, depending on the family.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-GZX70T
Capacity	70 L
Temperature Control Range	5 to 60 C
Temperature Resolution	0.1 C
Temperature Uniformity	+/- 1 C
Light Intensity	0 to 10000 Lux (6 levels)
Lighting Faces	2 faces
Controller	LCD microcomputer programmable controller
Chamber Material	Mirror-finish stainless-steel inner chamber
Exterior Shell	Cold-rolled steel shell with electrostatic powder coating
Power / Input	400 W
Power Supply	AC220V 50Hz
Timer Range	0 to 9999 min
Internal Dimensions	350 x 400 x 500 mm
External Dimensions	575 x 555 x 1170 mm
Net Weight	65 Kg
Shelves / Trays	2 shelves
Configuration Note	Top lighting and glass observation door support plant-growth experiments and daily visual inspection

Performance Features

Programmable control of temperature and light supports routine illuminated incubation workflows. This supports repeatable plant-growth and photoperiod experiments.
Top lighting helps create the illumination conditions needed for plant-growth experiments. This supports repeatable plant-growth and photoperiod experiments.
Mirror-finish stainless-steel chamber surfaces and a glass inner door support observation and cleaning. This helps with cleaning, corrosion resistance and long-term laboratory use.
Self-diagnosis, over-temperature self-limiting and power-off memory help protect the chamber during routine use. This helps preserve operation settings after power interruptions.
The series uses a clean cabinet structure with removable shelving for easier loading and maintenance. This supports more reliable day-to-day chamber use.
The same LCD operation framework keeps routine chamber control straightforward. This supports more reliable day-to-day chamber use.

APPLICATION SCOPE: Suitable for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection in universities, laboratories, research institutes and quality-control environments that need controlled chamber performance.

HANDLING: Keep the chamber level, leave enough room for ventilation and confirm the selected shelf and lighting configuration before operation. Every unit is shipped with reinforced packaging for transport safety; keep the unit upright during unloading and positioning.

IMPORTANT NOTICE: When set temperature is 10 C or below, ambient temperature should not exceed 26 C. The page also states a general work environment of 5 to 40 C and relative humidity below 90%. Any quoted amount refers to the chamber body only and does not include freight. Freight should be confirmed separately according to the delivery destination.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

The incubator requires a controlled ambient environment of 5 to 40 °C and relative humidity below 90 % for reliable operation. When the set temperature is 10 °C or lower, the ambient temperature must not exceed 26 °C to maintain stable chamber performance.

Ambient Temperature and Humidity Limits: The general work environment must be maintained at 5 to 40 °C with relative humidity below 90 %.
Low Set Temperature Condition: When the set temperature is 10 °C or below, the ambient temperature must not exceed 26 °C.
Level Placement Requirement: The chamber must be placed on a level surface to ensure proper operation and prevent instability.
Ventilation Clearance: Adequate space around the unit must be left for ventilation to avoid overheating.
Upright Transport and Positioning: The unit must be kept upright during unloading and positioning to prevent internal damage.

HowTo

Position the incubator on a level surface with adequate ventilation clearance and ensure the ambient conditions are within specified limits. Confirm the shelf configuration and lighting program before loading samples and starting the temperature controller.

Position the Incubator
Place the incubator on a level surface with at least 10 cm of clearance on all sides for ventilation.
Verify Ambient Conditions
Confirm the ambient temperature is between 5 and 40 °C and relative humidity is below 90 %, and if the set temperature is 10 °C or below, ensure ambient temperature does not exceed 26 °C.
Configure Shelves and Lighting
Select and install the required shelves and set the lighting intensity to the desired level using the LCD controller before loading samples.

FAQ

What ambient temperature constraint must be observed when the Top-Light Incubator 70 L is set to 10°C or below?

When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C to maintain stable operation. The general work environment is 5 to 40°C with relative humidity below 90%. This constraint is critical for achieving low-temperature incubation without compromising chamber performance.

How does the programmable light and timer control support photoperiod experiments in the Top-Light Incubator 70 L?

The incubator provides 0 to 10000 lux illumination in 6 programmable levels from a top-light configuration with 2 lighting faces. The LCD microcomputer controller allows programming of both temperature and light cycles, with a timer range of 0 to 9999 minutes. This enables precise day/night simulation for plant growth and photoperiod studies, while the tempered-glass inner door permits visual inspection without disturbing the internal environment.

What are the power supply and installation requirements for the Top-Light Incubator 70 L?

The unit requires a single-phase AC220V 50Hz power supply with an input power of 400 W. It must be kept level during operation, with adequate space for ventilation. The external dimensions are 575 x 555 x 1170 mm, net weight 65 kg, and the unit must be transported and positioned upright to avoid damage. The internal working space is 350 x 400 x 500 mm, and the chamber includes 2 stainless steel shelves.

Assessment

The Top-Light Incubator, 70 L (AF-GZX70T) provides a 70 L chamber with programmable temperature (5–60 °C) and top-illumination (0–10,000 lux, 6 levels) for illuminated incubation and plant-growth studies, but requires an ambient temperature ≤26 °C for setpoints ≤10 °C and operates only on AC220V 50Hz power.

Positive

Programmable temperature and light control: LCD microcomputer controller enables repeatable photoperiod and temperature ramps, supporting plant-growth, seed germination, and tissue culture protocols with 0.1 °C resolution.
Corrosion-resistant mirror-finish chamber: Mirror-finish stainless-steel inner chamber and tempered-glass inner door simplify cleaning and visual inspection during long-term incubation of microbial or plant samples.

Trade-offs

Ambient temperature limit at low setpoints: When the set temperature is 10 °C or below, the ambient temperature must not exceed 26 °C; otherwise, chamber performance may be compromised.
AC220V 50Hz power dependency: Unit is designed exclusively for AC220V 50Hz supply, requiring voltage- or frequency-conversion infrastructure for labs with 60 Hz or 110/115 V mains.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).