Top-Light Laboratory Incubator 460 L 5–60 °C ATOMFAIR®

Top-Light Incubator, 460 L

Research-grade laboratory product

Product Overview

Top-Light Incubator, 460 L is a practical chamber for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection. It brings together 460 l of usable space, 5 to 60 C and 0 to 10000 lux (6 levels) illumination, so the chamber can keep samples in a steady, repeatable working condition.

The cabinet combines a visible glass inner door, cleanable stainless-steel surfaces and a top-light layout to make sample observation and chamber maintenance easier. The cabinet uses a mirror-finish stainless-steel inner chamber, a tempered-glass inner door, a cold-rolled steel exterior and top lighting, with an internal working room of 650 x 650 x 1100 mm and an external footprint of 885 x 805 x 1795 mm. That combination of chamber size, shell build and liner material makes the unit easier to place, clean and use in routine laboratory work.

The family uses programmable temperature and light control to support plant-growth experiments and routine illuminated incubation. The stated input power is 1000 W, and the timer range is 0 to 9999 min. It is well suited to the day-to-day work listed above, including culture, incubation, climate simulation or illuminated growth tasks, depending on the family.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-GZX460T
Capacity	460 L
Temperature Control Range	5 to 60 C
Temperature Resolution	0.1 C
Temperature Uniformity	+/- 1 C
Light Intensity	0 to 10000 Lux (6 levels)
Lighting Faces	2 faces
Controller	LCD microcomputer programmable controller
Chamber Material	Mirror-finish stainless-steel inner chamber
Exterior Shell	Cold-rolled steel shell with electrostatic powder coating
Power / Input	1000 W
Power Supply	AC220V 50Hz
Timer Range	0 to 9999 min
Internal Dimensions	650 x 650 x 1100 mm
External Dimensions	885 x 805 x 1795 mm
Net Weight	150 Kg
Shelves / Trays	2 shelves
Configuration Note	Top lighting and glass observation door support plant-growth experiments and daily visual inspection

Performance Features

Programmable control of temperature and light supports routine illuminated incubation workflows. This supports repeatable plant-growth and photoperiod experiments.
Top lighting helps create the illumination conditions needed for plant-growth experiments. This supports repeatable plant-growth and photoperiod experiments.
Mirror-finish stainless-steel chamber surfaces and a glass inner door support observation and cleaning. This helps with cleaning, corrosion resistance and long-term laboratory use.
Self-diagnosis, over-temperature self-limiting and power-off memory help protect the chamber during routine use. This helps preserve operation settings after power interruptions.
The series uses a clean cabinet structure with removable shelving for easier loading and maintenance. This supports more reliable day-to-day chamber use.
The same LCD operation framework keeps routine chamber control straightforward. This supports more reliable day-to-day chamber use.

APPLICATION SCOPE: Suitable for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection in universities, laboratories, research institutes and quality-control environments that need controlled chamber performance.

HANDLING: Keep the chamber level, leave enough room for ventilation and confirm the selected shelf and lighting configuration before operation. Every unit is shipped with reinforced packaging for transport safety; keep the unit upright during unloading and positioning.

IMPORTANT NOTICE: When set temperature is 10 C or below, ambient temperature should not exceed 26 C. The page also states a general work environment of 5 to 40 C and relative humidity below 90%. Any quoted amount refers to the chamber body only and does not include freight. Freight should be confirmed separately according to the delivery destination.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

The incubator requires a level placement with adequate ventilation and ambient temperature not exceeding 26°C when set below 10°C. The chamber must be kept upright during transport and positioning to prevent damage, and the relative humidity should remain below 90%.

Ambient environment limits: The general work environment must be 5 to 40°C with relative humidity below 90% to ensure reliable operation.
Low-temperature set point constraint: When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C to prevent condensation or performance issues.
Level and ventilation requirement: The chamber must be placed on a level surface with sufficient clearance around the unit for ventilation and heat dissipation.
Upright transport and positioning: The unit must be kept upright during unloading and positioning to avoid damage to the refrigeration system or internal components.

HowTo

Place the incubator on a level surface with at least 10 cm clearance on all sides for ventilation. Confirm the shelf configuration and lighting settings before loading samples, then program the temperature and light cycle as needed.

Unpack and position chamber
Unpack the incubator and position it upright on a level, stable surface with adequate ventilation clearance.
Connect power supply
Connect the incubator to a grounded AC220V 50Hz power outlet that matches the rated input of 1000 W.
Set temperature and light parameters
Use the LCD microcomputer controller to set the desired temperature, light intensity, and timer duration for the experiment.
Verify ambient conditions
Confirm that the ambient temperature is within the allowed range, especially if the set point is 10°C or below.
Load samples onto shelves
Load samples onto the removable shelves, ensuring they are evenly spaced and do not block airflow.
Start the program and monitor
Start the programmed cycle and periodically observe the samples through the tempered glass inner door without disturbing the chamber environment.

FAQ

What ambient temperature conditions are required to maintain the incubator at a set temperature of 10°C or below?

For set temperatures of 10°C or below, the ambient temperature must not exceed 26°C. The general work environment is 5 to 40°C with relative humidity below 90%. This ensures proper operation of the cooling system.

How does the programmable controller enable repeatable photoperiod experiments in this 460 L incubator?

The LCD microcomputer programmable controller provides simultaneous control of temperature and light intensity across 6 levels (0 to 10000 lux) with a timer range of 0 to 9999 min, allowing users to program day/night cycles and maintain consistent conditions for plant growth and tissue culture experiments.

What safety features protect the incubator and samples during power interruptions?

The unit includes power-off memory that preserves all operation settings after a power interruption, along with self-diagnosis and over-temperature self-limiting functions to protect the chamber and samples during routine use.

Assessment

The Top-Light Incubator, 460 L (model AF-GZX460T) provides a 460-liter capacity with top-mounted illumination adjustable in six levels up to 10000 lux, programmable temperature and light control, and a mirror-finish stainless steel interior for easy cleaning and corrosion resistance, making it suitable for plant growth, tissue culture, and microbial incubation; however, operation at set temperatures of 10°C or below requires ambient temperature not exceeding 26°C, and the unit requires a 220V/50Hz power supply.

Positive

Top lighting with 6-level intensity control: The incubator provides illumination from 0 to 10000 lux in six levels from top-mounted lights, enabling reproducible photoperiod experiments for plant growth, tissue culture, and seed germination.
Mirror-finish stainless steel interior and glass door: The inner chamber is constructed from mirror-finish stainless steel for corrosion resistance and easy cleaning, while the tempered glass inner door allows visual inspection without disturbing the internal environment.

Trade-offs

Ambient temperature constraint at low set points: When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C, which may limit placement in warm laboratories without additional cooling.
Specific power supply requirement: The unit requires AC220V 50Hz power input, necessitating a voltage converter or dedicated circuit in regions with different electrical standards, adding to infrastructure planning.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).