|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 20 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium porous sheet is subject to media compatibility, process-condition, and handling constraints that determine its usable service life. Installation and cleaning procedures must protect the porous structure and stay within the stated service limits.
- Pre-Installation Compatibility Review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Porous Surface Protection: Protect the porous surface from crushing, impact, and contamination during handling and assembly.
- Service Temperature Limit: Maintain the operating temperature at or below the recommended service temperature to preserve the sintered structure.
- Cleaning Procedure Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Processing Compatibility: Use cutting, welding, or basic machining methods suitable for titanium when integrating the sheet into an assembly.
This procedure covers compatibility review, porous-surface protection, and post-service cleaning for a sintered porous titanium foam sheet. Completion of these steps preserves the porous structure and supports consistent filtration performance.
Required Equipment: Backflushing apparatus, Steam cleaning equipment, Ultrasonic cleaning bath
- Review Service Conditions
Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation. - Protect Porous Surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select Cleaning Method
Clean the sheet after service using backflushing, steam, ultrasonic, or compatible chemical cleaning methods according to the process medium.
What is the relationship between the 50 µm filtration rating and the 20 PPI pore density in this sintered titanium foam sheet?
The 50 µm filtration rating and the 20 PPI pore density are independent parameters. PPI (pores per inch) describes the cellular structure with an approximate cell spacing of 1.27 mm, while the micrometre value indicates the filtration precision for particle retention. Both values must be reviewed together when matching the sheet to an assembly, as they influence flow resistance and separation efficiency in different ways.
Can this 160 × 160 × 20 mm sintered titanium foam sheet be welded or machined for integration into existing filtration assemblies?
Yes, the metallic titanium construction supports cutting, welding, and basic machining for assembly integration. However, care must be taken to protect the porous structure from crushing or contamination during processing. Cleaning methods such as backflushing, steam, ultrasonic, or compatible chemical procedures are recommended after integration to maintain the 50 µm filtration performance.
What are the critical handling and storage requirements for this porous titanium foam sheet to preserve its filtration performance?
The porous surface must be protected from crushing and contamination during handling and storage. The recommended service temperature is ≤300°C to avoid compromising the sintered titanium structure. Cleaning can be performed using backflushing, steam, ultrasonic, or chemical methods depending on the process medium, and the sheet should be stored in a clean, dry environment to prevent pore blockage.
This 50 µm, 20 PPI sintered titanium foam sheet (160 × 160 × 20 mm) offers a 35–45% interconnected porous network with an estimated bulk density of 2.48–2.93 g/cm³, balancing filtration precision with structural integrity for laboratory-scale separation and flow-distribution studies.
Positive
- Interconnected porous structure: The 35–45% porosity with interconnected through-pores supports solid-liquid, gas-solid, and gas-liquid separation while maintaining open flow paths, enabling low flow resistance in compatible media.
- Corrosion and thermal resistance: Titanium-based construction provides corrosion resistance and thermal stability up to 300°C, allowing use in chemically aggressive or elevated-temperature filtration processes.
Trade-offs
- Surface vulnerability to damage: The porous surface must be protected from crushing and contamination during handling, as mechanical impact can compromise pore integrity and filtration performance.
- Temperature and media constraints: Recommended service temperature is limited to 300°C, and media compatibility must be verified before use, as aggressive chemicals or excessive thermal loads may degrade the structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
