|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 15 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the technical constraints for handling and installing the sintered porous titanium foam sheet. Operators must verify media compatibility, operating pressure, temperature, and cleaning method before service to avoid damage or contamination.
- Service temperature limit: Keep the sheet at or below 300°C in service.
- Media and process compatibility: Verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Surface integrity: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly integration: Confirm that cutting, welding, or basic machining is compatible with the final assembly requirements.
This procedure covers receiving, handling, and routine cleaning of the sintered porous titanium foam sheet. It is intended to preserve pore integrity and avoid contamination during laboratory or process use.
- Confirm service conditions
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and storage. - Select a cleaning method
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure.
How do PPI and filtration rating relate in sintered porous titanium foam sheets?
PPI (pores per inch) describes the cellular structure, while the micrometre value describes filtration precision. In this sheet, a 20 PPI structure with approximately 1.27 mm cell spacing provides a 50 µm filtration rating, with a porosity of 35–45% and interconnected flow paths. Both values must be reviewed together when matching the sheet to an assembly, as they independently affect flow and separation performance.
What is the maximum service temperature and what media compatibility considerations apply to this titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, temperature, and target flow must be reviewed before installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications, but specific media corrosion testing is advised.
What cleaning methods are recommended for the sintered porous titanium foam sheet?
To maintain the porous structure, cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures. The selection depends on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling and storage.
This 50 µm, 20 PPI sintered titanium foam sheet (160 × 160 × 15 mm) offers a 35–45% interconnected porous network with a bulk density of 2.48–2.93 g/cm³ and relative air permeability of 1 × 10⁻³ L/(cm²·min·Pa), balancing filtration precision with structural integrity for laboratory and engineered filtration trials.
Positive
- Interconnected porous structure: The 35–45% porosity with interconnected through-pores supports solid-liquid, gas-solid, and gas-liquid separation while maintaining open flow paths, enabling low flow resistance and stable filtration performance.
- Corrosion and thermal resistance: Titanium-based construction provides corrosion resistance and thermal stability up to 300°C in compatible media, allowing use in chemical, petrochemical, and pharmaceutical processes where polymeric filters would degrade.
Trade-offs
- Surface vulnerability to damage: The porous surface must be protected from crushing and contamination during handling and installation, as mechanical impact can collapse the cellular structure and compromise filtration integrity.
- Operating temperature limit: Recommended service temperature is limited to ≤300°C, which constrains use in high-temperature gas or steam filtration applications beyond this threshold without risking structural or performance degradation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
