|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Handling and service constraints are limited to compatibility review and surface preservation for this sintered titanium foam sheet. The sheet must be operated within its recommended temperature limit and protected from crushing or contamination before installation.
- Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation.
- Thermal Limit: Maintain the recommended service temperature at or below 300°C during operation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
Follow these steps to confirm service conditions, protect the porous structure, and select an appropriate cleaning method. The sequence applies before and after installation of the sintered titanium foam sheet.
Required Equipment: Backflushing equipment, Steam cleaning equipment, Ultrasonic cleaning bath
- Confirm Service Conditions
Confirm the required operating parameters and media compatibility before installing the sheet. - Match Filtration Parameters
Match the assembly to both the PPI cellular-structure value and the micrometre filtration rating when selecting the sheet. - Protect Porous Surface
Protect the porous surface from crushing and contamination during handling and installation. - Select Cleaning Method
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
What is the difference between the 50 µm filtration rating and the 20 PPI pore density in this sintered titanium foam sheet?
The 50 µm filtration rating specifies the particle size the sheet can retain, while the 20 PPI (pores per inch) describes the cellular structure's pore density. They are independent parameters; PPI affects flow distribution and backpressure, while the micrometre rating determines filtration precision. Both must be reviewed together when selecting the sheet for a specific application.
Can this sintered titanium foam sheet be welded or machined for custom assembly integration?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The sheet is made from titanium or titanium alloy via powder forming and high-vacuum sintering, which retains enough mechanical integrity for standard fabrication techniques. However, care should be taken to avoid damaging the porous structure during machining.
What cleaning methods are recommended for this 50 µm titanium foam sheet to avoid clogging and maintain flow?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The interconnected porous structure (35–45% porosity, ~1.27 mm cell spacing) allows for effective cleaning, but the porous surface should be protected from crushing and contamination. The choice of cleaning method depends on the process medium and operating procedure.
This 50 µm, 20 PPI sintered titanium foam sheet (160×160×10 mm) offers a 35–45% interconnected porosity with low flow resistance and corrosion resistance up to 300°C, suitable for liquid and gas filtration in laboratory and pilot-scale assemblies.
Positive
- Interconnected porous flow paths: The 35–45% porosity with 20 PPI structure provides open, interconnected channels that enable low flow resistance and high relative air permeability of 1×10⁻³ L/(cm²·min·Pa), supporting efficient solid-liquid and gas-solid separation.
- Corrosion resistance and thermal stability: Titanium-based construction offers compatibility with aggressive media and a recommended service temperature up to 300°C, making it suitable for chemical, pharmaceutical, and high-temperature filtration processes.
Trade-offs
- Susceptible to surface damage: The porous structure must be protected from crushing and contamination during handling and cleaning; backflushing, steam, ultrasonic, or chemical cleaning must be matched to the process medium to avoid structural degradation.
- Application-specific parameter review required: The provided filtration rating (50 µm) and PPI (20) are nominal; actual performance depends on media compatibility, operating pressure, temperature, and flow rate, which must be verified before installation to avoid premature fouling or bypass.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
