|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Technical constraints for the sintered titanium foam sheet focus on media compatibility, thermal limits, surface protection, and integration methods. The sheet must be reviewed against operating pressure, temperature, flow, and media before installation.
- Media Compatibility Review: Confirm chemical compatibility of the process medium with the titanium or titanium-alloy structure before installation.
- Service Temperature Limit: Do not exceed the recommended service temperature of 300°C during operation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and assembly.
- Cleaning Procedure Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Integration: Apply cutting, welding, or basic machining for assembly integration.
How does the 30 PPI cellular structure affect the effective filtration performance of the 50 µm rated titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure's pore density, while the 50 µm rating indicates the particle retention size. The 0.85 mm cell spacing and 35–45% porosity create interconnected flow paths that allow high permeability (relative air permeability 1×10⁻³ L/(cm²·min·Pa)) but may reduce the absolute filtration efficiency compared to a sintered powder structure. The general filtration range for this product is 0.45–100 µm, with a pore-size range of 2.5–160 µm, so the 50 µm rating is a nominal value; actual retention depends on the application parameters.
What are the critical media compatibility and operating constraints for this sintered titanium foam sheet?
Media compatibility must be reviewed before installation. The product is intended for water treatment, chemical, petrochemical, pharmaceutical, food, gas purification, catalyst recovery, oil filtration, and seawater pretreatment. The titanium material provides corrosion resistance and thermal stability up to ≤300°C, but specific media compatibility, operating pressure, and temperature need to be confirmed with the manufacturer.
What cleaning procedures are recommended to maintain the performance of the sintered titanium foam sheet without damaging the porous structure?
The manufacturer recommends backflushing, steam cleaning, ultrasonic cleaning, or compatible chemical cleaning methods depending on the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling. Because the sheet has a 35–45% porosity with interconnected passages, aggressive mechanical cleaning or high-pressure streams could deform the structure. Always follow the recommended cleaning procedure for the specific fouling medium.
This 100 × 200 × 5 mm sintered titanium foam sheet combines a 50 µm filtration rating with a 30 PPI open-cell structure, 35–45% porosity, and about 0.85 mm cell spacing, making it suitable for corrosion- and heat-tolerant liquid/gas separation up to 300°C. The cleanable, machinable metal framework supports lab filtration and flow-distribution work, but requires crush/contamination protection and pre-installation verification of media compatibility, pressure, temperature, and flow.
Positive
- Corrosion-resistant, heat-tolerant sintered titanium matrix: Powder-formed and high-vacuum-sintered titanium provides corrosion resistance, thermal stability, cleanability, and reuse in compatible process media, supporting service up to 300°C.
- Uniform pores give stable, controlled filtration: The 50 µm filtration rating paired with a 30 PPI structure and approximately 0.85 mm cell spacing yields 35–45% interconnected porosity with uniformly distributed pores for stable separation and controlled filtration.
Trade-offs
- 300°C service temperature ceiling: Recommended service temperature is limited to ≤300°C, so higher-temperature process conditions exceed the stated operating limit.
- Porous surface requires crush and contamination protection: The porous sheet must be shielded from crushing and contamination during handling; cleaning should be matched to the process medium via backflushing, steam, ultrasonic, or chemical procedures.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
