|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 100 × 1 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This porous metallic sheet requires protection from crushing, contamination, and incompatible media during handling and service. Its service temperature is limited to ≤300°C, and media compatibility, operating pressure, temperature, flow, and dimensional tolerance must be reviewed before installation.
- Media and operating condition review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Surface protection: Protect the porous surface from crushing and contamination during handling and assembly.
- Cleaning method selection: Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Thermal limit: Recommended service temperature is ≤300°C.
- Assembly modification: Metallic construction supports cutting, welding, and basic machining for assembly integration.
This procedure covers pre-installation verification, surface protection, and cleaning of the sintered porous titanium sheet. Users should confirm operating conditions before deployment and select cleaning according to the process medium and operating procedure.
- Confirm operating conditions
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Cross-check structural and filtration ratings
Review both the PPI cellular-structure value and the micrometre filtration rating together when matching the sheet to an assembly. - Protect the surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select the cleaning method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
How does the 20 PPI pore density correlate with the 50 µm filtration rating in this sintered titanium foam sheet?
The 20 PPI (pores per inch) describes the cellular structure, while the 50 µm value specifies the filtration precision. These are independent parameters: the porous cell spacing is approximately 1.27 mm, and the filtration rating is 50 µm, meaning the sheet can capture particles down to 50 microns while maintaining open flow paths through the 20 PPI structure. The general filtration range of the product line is 0.45–100 µm, with a pore-size range of 2.5–160 µm, so the 50 µm rating is a specific selection within that capability.
What are the maximum operating temperature and pressure limits for the Atomfair AF-T20-A0150 porous titanium sheet?
The recommended service temperature is ≤300°C, as stated in the technical specifications. The source does not specify an explicit maximum operating pressure; instead, it advises that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before installation. The titanium material provides corrosion resistance and thermal stability, but pressure limits depend on the specific assembly and application.
What cleaning methods are compatible with this sintered porous titanium sheet without compromising its structure?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. It is important to protect the porous surface from crushing and contamination. The metallic construction supports cutting, welding, and basic machining, but cleaning should be chosen to avoid damaging the interconnected porous flow paths.
This 100 × 100 × 1 mm sintered titanium foam sheet combines a 50 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, providing low-resistance, corrosion-resistant paths for solid-liquid and gas-liquid separation up to 300°C. Its metallic construction supports cutting, welding, basic machining, and cleanable reuse via backflushing, steam, ultrasonic, or compatible chemical cleaning, while the crush-sensitive porous surface requires careful handling.
Positive
- Interconnected porous flow structure: The 35–45% porosity with interconnected passages and 50 µm filtration rating supports low-resistance solid-liquid, gas-solid, and gas-liquid separation while preserving open flow paths.
- Corrosion-resistant and cleanable metallic media: Titanium-based construction provides corrosion resistance and thermal stability in compatible media, and the sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service temperature capped at 300°C: Recommended service temperature is limited to ≤300°C, so higher-temperature process streams require revalidation of media compatibility and operating limits.
- Crush- and contamination-sensitive porous surface: The 1 mm porous sheet must be protected from crushing and contamination, and cleaning approach must be matched to process medium to avoid compromising the structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
