|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 100 × 1 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document specifies handling, cleaning, and service constraints for the sintered porous titanium foam sheet. Compliance preserves the porous structure and prevents media contamination or structural damage.
- Service Temperature Limit: Do not operate the sheet above the 300°C recommended service temperature.
- Mechanical Protection: Protect the porous surface from crushing and contamination during handling, installation, and service.
- Process Compatibility Review: Verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
This procedure covers installation review, placement, and cleaning of the sintered porous titanium foam sheet in filtration assemblies. It is intended for laboratory and engineered process use within the stated service conditions.
Required Equipment: Filtration assembly, Cleaning apparatus for backflushing, steam, ultrasonic, or compatible chemical methods
- Inspect the sheet
Inspect the sheet for visible crushing, contamination, or other damage before installation. - Verify process compatibility
Verify filtration rating, PPI, dimensions, material grade, target flow, operating pressure, temperature, and media compatibility against the assembly requirements. - Install the sheet
Install the sheet without crushing or contaminating the porous surface. - Select a cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure. - Monitor service temperature
Monitor service temperature to remain at or below the 300°C limit.
How does the 110 PPI pore density interact with the 50 µm filtration rating to determine the balance between flow permeability and particle retention in this sintered titanium foam sheet?
The 110 PPI (pores per inch) indicates a cellular structure with approximately 0.23 mm cell spacing, while the 50 µm filtration rating specifies the particle size retention. The relative air permeability for this sheet is 1 × 10⁻³ L/(cm²·min·Pa), reflecting the open interconnected porosity of 35–45%. Higher PPI generally increases surface area for filtration but may reduce flow, so the 110 PPI at 50 µm is a specific trade-off optimized for applications requiring moderate flow with 50 µm particle capture.
What are the critical operating constraints for using this 100 × 100 × 1 mm sintered titanium sheet in high-temperature or corrosive fluid filtration?
The recommended service temperature is ≤300°C, with corrosion resistance in compatible media due to the titanium and titanium alloy construction. However, the source explicitly states that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation, as no specific pressure rating is provided. The sheet's 1 mm thickness and 35–45% porosity may limit mechanical strength under high differential pressure.
What are the recommended cleaning and handling protocols to maintain the filtration performance of this 50 µm porous titanium sheet without causing structural damage?
The manufacturer recommends protecting the porous surface from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid clogging or deforming the 1 mm thick open-pore structure.
The Atomfair 50 µm sintered porous titanium foam sheet (100 × 100 × 1 mm, 110 PPI) provides an interconnected 35–45% porosity titanium network with corrosion resistance, thermal stability up to 300°C, and cleanability via backflushing, steam, ultrasonic, or chemical methods, making it suitable for lab-scale filtration and porous-electrode/flow-distribution studies.
Positive
- Corrosion resistance and thermal stability: The titanium/titanium-alloy porous structure formed by powder pressing and high-vacuum sintering provides corrosion resistance and heat tolerance up to 300°C in compatible media, supporting use in chemical, pharmaceutical, water-treatment, and gas-purification filtration workflows.
- Cleanable and machinable metallic medium: The porous sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, and the metallic construction supports cutting, welding, and basic machining for integration into assemblies.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature gas, steam, or process streams fall outside the stated operating envelope and require cautious compatibility review before use.
- Process and handling validation required: Media compatibility, operating pressure, target flow, and dimensional tolerance must be confirmed before installation, and the 1 mm porous surface must be protected from crushing and contamination during handling and cleaning.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
