|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 2.8 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface must be protected from crushing and contamination to maintain filtration integrity. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation.
- Temperature Limit: Recommended service temperature does not exceed 300°C.
- Cleaning Restriction: Cleaning methods are limited to backflushing, steam, ultrasonic, or compatible chemical procedures.
- Mechanical Handling: Cutting, welding, and basic machining are permitted for assembly integration.
Protect the porous surface from physical damage and contamination during handling. Select a cleaning method compatible with the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the porous surface for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, following the manufacturer's recommended parameters. - Verify cleanliness
Verify that the porous structure is free of residual contaminants before reinstallation.
How do the 110 PPI cellular structure and 30 µm filtration rating relate on this sintered titanium foam sheet?
PPI (pores per inch) describes the density of the cellular structure, while the 30 µm value specifies filtration precision. Both parameters must be reviewed together when matching the sheet to an assembly, as the pore density influences flow distribution and mechanical strength, whereas the micron rating defines the particle size cutoff.
Can this 200×200×2.8 mm sintered titanium foam sheet be cut or welded to fit non-standard assemblies?
Yes, the metallic porous construction supports cutting, welding, and basic machining for assembly integration. Custom dimensions are also available upon consultation, and the 2.8 mm thickness provides sufficient structural integrity for such modifications.
What cleaning methods are recommended for this porous titanium foam sheet to maintain filtration performance?
Recommended cleaning methods include backflushing, steam treatment, ultrasonic cleaning, and compatible chemical procedures. The porous surface must be protected from crushing and contamination, and the choice of method should be based on the process medium and operating procedure.
This 200 × 200 × 2.8 mm sintered titanium sheet combines a 30 µm filtration rating with a 110 PPI open-cell structure at 35–45% porosity, making it suitable for liquid/gas separation trials where the ≤300°C service limit and media compatibility are respected.
Positive
- Interconnected porous titanium network: The 110 PPI cellular structure with 35–45% porosity and approximately 0.23 mm cell spacing provides interconnected flow paths, supporting 30 µm filtration with stable separation and low flow resistance.
- Corrosion-resistant and cleanable metallic media: The sintered titanium construction provides corrosion resistance and thermal stability in compatible media and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature separation or filtration applications require alternative media or explicit engineering review.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and the selected cleaning method must match the process medium and operating procedure to preserve pore integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
