|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 1.5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This porous titanium sheet requires protection from crushing and contamination before and during installation. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before use.
- Mechanical handling constraint: Protect the porous surface from crushing and contamination during handling and installation.
- Thermal service limit: Operate the sheet at or below the recommended service temperature of 300°C.
- Process compatibility review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Assembly integration capability: Use cutting, welding, or basic machining to integrate the metallic structure into an assembly when needed.
- Cleaning method selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure.
Verify process compatibility and protect the porous structure before positioning the sheet in an assembly. Select cleaning methods that match the process medium and operating procedure.
- Confirm Installation Requirements
Confirm required filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Review Structural and Filtration Specification
Review both PPI cellular structure and micron filtration precision when matching the sheet to an assembly. - Protect the Porous Surface
Protect the porous surface from crushing and contamination during handling and positioning. - Select a Cleaning Method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the 110 PPI pore density affect the filtration performance of the 30 µm titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure with approximately 0.23 mm cell spacing, while the 30 µm value is the filtration rating. The 35–45% porosity and interconnected pore structure provide low flow resistance while maintaining the 30 µm filtration precision. The relative air permeability is 5 × 10⁻⁴ L/(cm²·min·Pa). Both PPI and micrometre values must be reviewed together to match the sheet to the assembly.
What are the recommended operating temperature limits and media compatibility considerations for the sintered titanium foam sheet?
The recommended service temperature is ≤300 °C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, and target flow must be reviewed before quotation. The sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures depending on the process medium.
Can the 200×200×1.5 mm titanium foam sheet be cut or welded for custom integration into an existing filtration assembly?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling. Custom dimensions are available upon consultation; include required length, width, thickness, PPI, filtration rating, and quantity when requesting dimensional review.
The 200 × 200 × 1.5 mm sintered titanium foam sheet with a 30 µm filtration rating and 110 PPI cellular structure provides an interconnected 35–45% porosity network for separation and flow applications, but its 300°C service ceiling and crush-sensitive porous surface require process-specific validation before installation.
Positive
- Interconnected 35–45% porosity enables low-resistance flow: The sintered titanium framework contains interconnected passages with approximately 0.23 mm cell spacing, supporting solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.
- Corrosion-resistant, heat-tolerant and cleanable metallic structure: The titanium-based porous construction offers corrosion resistance and thermal stability in compatible media, with cleanability through backflushing, steam, ultrasonic or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so the sheet must not be deployed in higher-temperature filtration or thermal processes without prior engineering review.
- Porous surface vulnerable to crushing and contamination: Handling guidance requires protecting the porous surface from crushing and contamination, and cleaning should be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
