|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 160 × 160 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires protection from surface crushing and contamination to preserve its filtration performance. Media compatibility, operating pressure, temperature, and flow must be reviewed before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to avoid compromising the 30 µm filtration rating.
- Service Temperature Limit: Do not exceed the recommended service temperature of 300°C to prevent structural degradation.
- Media Compatibility Review: Confirm media compatibility with the titanium or titanium-alloy structure before use in any process.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
This procedure covers safe handling and cleaning of the sintered porous titanium sheet to maintain its filtration performance. Follow these steps to avoid surface damage and ensure effective cleaning.
Required Equipment: Clean, lint-free gloves, Ultrasonic bath or backflushing system, Steam cleaner or compatible chemical cleaning agents
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before handling. - Wear protective gloves
Wear clean, lint-free gloves to prevent contamination of the porous surface. - Handle with care
Handle the sheet by its edges to avoid crushing or denting the porous structure. - Choose a cleaning method
Choose a cleaning method based on the process medium and operating procedure. - Apply the cleaning method
Apply the selected cleaning method, such as backflushing, steam, ultrasonic, or chemical cleaning. - Rinse thoroughly
Rinse the sheet thoroughly with compatible solvent or water to remove any cleaning residues. - Dry and store
Dry the sheet completely and store it in a clean, dry environment to prevent contamination.
How does the 30 µm filtration rating of this sintered titanium foam sheet compare to its 110 PPI pore density, and what does that mean for flow resistance?
The 30 µm rating specifies the particle size retained, while 110 PPI describes the number of pores per inch. The sheet's 35–45% porosity and 0.23 mm cell spacing create interconnected paths. The relative air permeability is 5×10⁻⁴ L/(cm²·min·Pa), indicating moderate flow resistance suitable for liquid and gas filtration at ≤300°C.
What are the key considerations for integrating this 160×160×5 mm titanium foam sheet into a high-temperature filtration assembly?
The sheet is rated for service temperatures up to 300°C and is made from titanium or titanium alloy, offering corrosion resistance. It can be cut, welded, or machined for custom assembly. Confirm media compatibility and operating pressure before installation, as the source does not specify pressure limits.
What cleaning procedures are recommended for this porous titanium foam sheet to maintain filtration performance?
Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning. The porous surface must be protected from crushing and contamination during handling. The sheet is reusable when cleaned appropriately per the process medium.
This 160 × 160 × 5 mm sintered titanium foam sheet (Atomfair AF-T110-D0530) combines a 30 µm filtration rating with a 110 PPI cellular structure and 35–45% porosity, providing a cleanable, corrosion-resistant porous metal medium for liquid and gas separation trials. The 300°C service ceiling and crush-sensitive porous surface require process-condition and handling verification before installation.
Positive
- Interconnected 35–45% porosity flow paths: The sintered titanium framework provides interconnected through-pore passages with approximately 0.23 mm cell spacing, supporting solid-liquid, gas-solid and gas-liquid separation with low flow resistance.
- Corrosion-resistant cleanable metallic structure: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, and its metallic construction supports cutting, welding or basic machining. Cleaning can be performed by backflushing, steam, ultrasonic or compatible chemical procedures.
Trade-offs
- 300°C maximum service temperature: Recommended service temperature is limited to 300°C, so process temperature must be verified as compatible before installation.
- Process compatibility must be pre-validated: Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation, and the porous surface must be protected from crushing and contamination during handling.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
