|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 15 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires verification of media compatibility and operating parameters before installation. The porous surface must be protected from crushing and contamination, and service temperature should not exceed 300°C.
- Media Compatibility Check: Verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Temperature Limit: The recommended service temperature is ≤300°C to maintain structural integrity.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning Methods: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Machining Allowance: The metallic construction supports cutting, welding, and basic machining for assembly integration.
Follow these steps to safely handle and clean the porous titanium sheet. Proper handling prevents damage and ensures long service life.
- Inspect the sheet
Inspect the porous sheet for any visible damage or contamination before use. - Select cleaning method
Select the appropriate cleaning method from backflushing, steam, ultrasonic, or chemical procedures based on the process medium. - Handle with care
Protect the porous surface from crushing and contamination during handling and storage.
What is the relationship between the 30 µm filtration rating and the 20 PPI pore density in this sintered titanium foam sheet?
The 30 µm filtration rating and 20 PPI (pores per inch) are independent parameters that describe different aspects of the sheet. The 30 µm rating indicates the particle size retained during filtration, while the 20 PPI value refers to the cellular structure's pore density, with an approximate cell spacing of 1.27 mm. Both must be evaluated together when matching the sheet to an assembly, as the filtration precision determines separation capability and the PPI governs flow distribution and pressure drop.
Can this sintered titanium foam sheet be welded or machined for integration into existing assemblies?
Yes, the metallic construction of this titanium foam sheet supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling and fabrication. The sheet is manufactured from titanium or titanium-alloy powder via high-vacuum sintering, so standard metalworking practices for titanium should be used to avoid damaging the interconnected porous structure.
What are the recommended cleaning methods and maximum service temperature for this 30 µm sintered titanium foam sheet?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The recommended service temperature is ≤300°C, as the titanium-based porous structure provides corrosion resistance and thermal stability within that range. Regular cleaning helps maintain the open pore network and filtration performance.
This 30 µm, 20 PPI sintered titanium foam sheet (120 × 120 × 15 mm) presents a corrosion-resistant, cleanable metallic porous medium with 35–45% porosity and interconnected flow paths, while its 300°C service ceiling and handling sensitivity define the main deployment constraints.
Positive
- Corrosion-resistant cleanable porous structure: Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media; 35–45% open porosity with interconnected passages supports low flow resistance and cleaning via backflushing, steam, ultrasonic, or compatible chemical procedures.
- Machinable for assembly integration: Metallic construction supports cutting, welding, and basic machining, allowing the sheet to be integrated into engineered filtration assemblies.
Trade-offs
- Service temperature capped at 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require material-grade and system-level verification before use.
- Porous surface sensitive to crushing: Handling guidance requires protecting the porous surface from crushing and contamination; cleaning method must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
