|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document records the stated technical constraints for the sintered porous titanium sheet. It covers thermal, mechanical, and cleaning limits applicable before and during use.
- Thermal constraint: The recommended service temperature is limited to 300°C or less.
- Mechanical handling constraint: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning compatibility: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Process compatibility review: Confirm media compatibility, operating pressure, temperature, and target flow before installation.
- Assembly integration constraint: Support cutting, welding, and basic machining only within assembly integration procedures that preserve the porous structure.
This procedure describes safe handling and cleaning of the sintered porous titanium sheet. The steps prevent surface damage and contamination before or after use.
Required Equipment: Backflushing equipment, Steam cleaning system, Ultrasonic bath, Compatible chemical cleaning agents
- Inspect the sheet
Inspect the sheet for visible deformation, crushing, or contamination before handling or installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and storage. - Confirm process compatibility
Confirm media compatibility, operating pressure, temperature, and target flow before installation. - Select a cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure. - Clean according to procedure
Clean the sheet according to the selected method and the process operating procedure.
How does the 30 PPI cellular structure relate to the 30 µm filtration rating on this sintered titanium foam sheet?
PPI (pores per inch) describes the macroporous cell structure and flow capacity, while the micron rating defines the particle retention size. The product’s 30 PPI structure yields ~0.85 mm cell spacing and 35–45% porosity, providing open flow paths, while the 30 µm rating sets the filtration precision. Both parameters are independent and must be reviewed together when matching the sheet to a specific separation application.
Can this sintered titanium foam sheet be used in gas filtration applications above 300 °C?
No, the recommended service temperature is ≤300 °C as stated in the technical specifications. Operating above this limit may compromise the structural integrity of the sintered titanium framework. Always confirm temperature compatibility with the process medium before installation.
What cleaning methods are recommended for this porous titanium foam sheet to avoid damage?
The product supports backflushing, steam, ultrasonic, and compatible chemical cleaning procedures. The porous surface must be protected from crushing and contamination during handling and cleaning. The choice of method should be based on the process medium and standard operating procedures.
This sintered titanium foam sheet couples a 30 µm filtration rating with a 30 PPI interconnected porous structure in a 100 × 200 × 5 mm format, offering 35–45% porosity for filtration and flow-distribution trials. Its 300°C service ceiling and crush-sensitive porous surface require compatibility and handling review before installation.
Positive
- Interconnected porous flow structure: The 35–45% porosity with approximately 0.85 mm cell spacing provides interconnected passages suited to solid-liquid, gas-solid, and gas-liquid separation while maintaining open pathways for flow.
- Corrosion-resistant and cleanable metallic media: The titanium-based porous structure offers corrosion resistance, heat tolerance, and cleanability by backflushing, steam, ultrasonic, or compatible chemical procedures in suitable process conditions.
Trade-offs
- Limited to 300°C service temperature: Recommended service temperature is ≤300°C, so higher-temperature filtration or separation applications require alternate media or explicit engineering review.
- Crush-sensitive porous surface: The porous surface must be protected from crushing and contamination during handling and installation, requiring careful fixturing and cleaning procedures.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
