|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet is intended for filtration and separation within its rated service envelope. Handling, cleaning, and integration procedures must preserve the porous structure and media compatibility.
- Service Temperature Limit: Do not operate the sheet above the recommended 300°C service temperature.
- Mechanical Protection: Protect the porous surface from crushing and contamination during handling and installation.
- Cleaning Procedure Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Integration: Use cutting, welding, or basic machining only as appropriate for the metallic porous structure when integrating the sheet into an assembly.
- Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
These steps cover pre-installation review, safe handling, and routine cleaning of the sintered titanium foam sheet. Follow the stated order to preserve pore structure and avoid media incompatibility.
Required Equipment: Backflushing apparatus, Steam cleaner, Ultrasonic cleaner
- Confirm Service Conditions
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation. - Protect Porous Surface
Protect the porous surface from crushing and contamination during handling and installation. - Integrate by Machining or Assembly
Use cutting, welding, or basic machining only as appropriate for the metallic porous structure if assembly integration is required. - Select Cleaning Method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure. - Store Within Temperature Limit
Store or operate the sheet within the recommended 300°C service temperature limit.
How does the 110 PPI pore density correspond to the 30 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure density, while the 30 µm rating specifies the filtration precision; these are independent parameters. The sheet's 35–45% porosity and approximately 0.23 mm cell spacing support interconnected flow paths, and both PPI and micron rating must be reviewed together to match the sheet to a specific assembly and target separation efficiency.
What is the maximum recommended service temperature for this titanium foam sheet, and what factors affect its chemical compatibility?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but media compatibility, operating pressure, temperature, and target flow should be reviewed before quotation or installation. The sheet is made from titanium or titanium-alloy powder via high-vacuum sintering, with a bulk density estimate of 2.48–2.93 g/cm³.
What cleaning methods are recommended for this porous titanium foam sheet to avoid damaging the open-pore structure?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures. The porous surface must be protected from crushing and contamination, and the cleaning method should be chosen according to the process medium and operating procedure. The sheet's interconnected through-pore structure (35–45% porosity) allows effective cleaning without blocking flow paths.
This 30 µm, 110 PPI sintered titanium foam sheet in a 100 × 200 × 5 mm format provides an interconnected 35–45% porosity structure for liquid and gas filtration, but its ≤300°C service ceiling and crush-sensitive porous surface require careful operating and handling qualification.
Positive
- Interconnected porous titanium structure: High-vacuum sintered titanium foam sheet with 35–45% porosity and ~0.23 mm cell spacing provides interconnected flow paths for 30 µm solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable metallic media: Titanium-based construction tolerates compatible process media, supports cutting, welding, and basic machining for assembly integration, and can be cleaned by backflushing, steam, ultrasonic, or chemical procedures for reuse.
Trade-offs
- Limited to 300°C service temperature: Recommended service temperature is ≤300°C, so the sheet cannot be used in higher-temperature filtration or thermal processes without exceeding the stated operating limit.
- Porous surface needs crush and contamination protection: The open porous surface is vulnerable to mechanical crushing and contamination, so handling, cleaning, and installation procedures must protect pore integrity; media compatibility and operating pressure/flow must be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
