|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 200 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from surface crushing and contamination to preserve its porous structure and filtration integrity. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent degradation or failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural compromise.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures depending on the process medium.
- Machining Constraint: The metallic construction supports cutting, welding, and basic machining but requires care to avoid pore collapse.
Inspect the sheet for visible damage or contamination before installation. Confirm media compatibility, operating pressure, and temperature against the sheet's rated limits.
Required Equipment: Clean gloves, Soft brush or lint-free cloth
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before handling. - Clean the surface
Gently remove loose particles from the porous surface using a soft brush or lint-free cloth. - Verify compatibility
Confirm that the process medium, operating pressure, and temperature are within the sheet's rated limits. - Install the sheet
Position the sheet in the assembly without applying excessive force that could crush the porous structure. - Secure the assembly
Seal the assembly according to the manufacturer's instructions to prevent bypass flow around the sheet.
How do the 110 PPI and 30 µm filtration rating relate in this sintered titanium foam sheet?
PPI (pores per inch) describes the cellular structure density, while the micrometre value (30 µm) indicates the filtration precision. They are independent parameters; both must be reviewed together when matching the sheet to an assembly. The 110 PPI structure yields approximately 0.23 mm cell spacing and 35–45% porosity, while the 30 µm rating defines the particle retention size.
What are the operating temperature and pressure constraints for this titanium foam sheet?
The recommended service temperature is ≤300°C. The source does not specify a maximum operating pressure; it states that operating pressure should be reviewed before quotation or installation. The sheet's 35–45% porosity and titanium construction provide corrosion resistance and thermal stability, but pressure limits depend on the assembly design and media compatibility.
How should this porous titanium sheet be cleaned and handled to maintain performance?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to preserve the interconnected pore structure.
This 100 × 200 × 3 mm sintered titanium foam sheet combines a 30 µm filtration rating with a 110 PPI cellular structure, 35–45% porosity, and corrosion-resistant metallic construction suitable for lab-scale filtration, flow distribution, and porous-electrode studies; however, its ≤300°C service limit and need to protect the porous surface mean process media and handling conditions must be validated before installation.
Positive
- Interconnected 35–45% porous titanium network: The sheet provides interconnected through-pore flow paths with about 0.23 mm cell spacing, supporting solid-liquid, gas-solid, and gas-liquid separation while contributing to low flow resistance, cleanability, and reuse in compatible service.
- Metallic structure supports machining and multiple cleaning routes: The sintered titanium construction can be cut, welded, or machined for assembly integration, and cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures.
Trade-offs
- Service temperature capped at 300°C: The datasheet specifies a recommended service temperature of ≤300°C, so any process or thermal-management application above this limit would require additional qualification or a different material system.
- Porous surface needs crush and contamination protection: Handling guidance warns against crushing and contaminating the porous surface and requires selecting backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
