|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 100 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must not be operated above 300°C to avoid structural degradation. The porous surface must be protected from crushing and contamination during handling and cleaning.
- Temperature Limit: Recommended service temperature does not exceed 300°C.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and cleaning.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures based on the process medium.
- Media Compatibility Review: Media compatibility, operating pressure, and temperature must be reviewed before installation.
Inspect the sheet for damage before installation and protect the porous surface from crushing. Select a cleaning method based on the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, following the manufacturer's recommended parameters. - Rinse and dry
Rinse the sheet with compatible solvent and dry it before reuse.
What is the difference between the 30 µm filtration rating and the 20 PPI pore density on this sintered titanium foam sheet?
The 30 µm value is the filtration precision, while the 20 PPI value describes the cellular pore structure; both must be reviewed together when matching the sheet to an assembly. This 100 × 100 × 3 mm sintered titanium sheet has a 35–45% porosity range, approximately 1.27 mm cell spacing, a general filtration range of 0.45–100 µm, and a reported relative air permeability of 5 × 10^-4 L/(cm²·min·Pa).
Can this 30 µm porous titanium foam sheet be cut, welded, or machined for integration into an existing filtration assembly?
Yes, the metallic porous structure can support cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination, and the material grade, operating pressure, temperature, media compatibility, target flow, and dimensional tolerance should be confirmed before quotation or installation.
What cleaning methods and service temperature limit apply to this sintered porous titanium foam sheet?
The recommended service temperature is ≤300°C. For cleaning, the sheet supports backflushing, steam, ultrasonic, and compatible chemical procedures, with the choice depending on the process medium and operating procedure. Its titanium-based porous structure provides corrosion resistance, heat tolerance, and reusability in compatible process conditions.
This sintered porous titanium foam sheet (100 × 100 × 3 mm, 30 µm filtration rating, 20 PPI) offers a corrosion-resistant, thermally stable metallic porous structure with 35–45% interconnected porosity and low flow resistance, suitable for solid-liquid and gas separation in laboratory and engineered filtration assemblies. Its 300°C service temperature limit and need for careful handling to avoid pore crushing and contamination are key operational constraints.
Positive
- Corrosion-resistant metallic porous structure: Titanium-based construction with 35–45% interconnected porosity provides corrosion resistance and thermal stability up to 300°C, enabling use in aggressive chemical and high-temperature filtration environments.
- Cleanable and machinable for integration: The metallic porous sheet supports backflushing, steam, ultrasonic, and chemical cleaning, and can be cut, welded, or machined for assembly into custom filtration systems.
Trade-offs
- Limited service temperature ≤300°C: The recommended maximum service temperature is 300°C, restricting use in high-temperature processes above this threshold without material degradation risk.
- Susceptible to pore crushing and contamination: The porous surface must be protected from mechanical crushing and contamination during handling and cleaning; incompatible cleaning agents or procedures can compromise filtration performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
