|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 100 × 100 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document describes the operational constraints for the 30 µm sintered titanium foam sheet. Adherence to these limits ensures reliable filtration performance and prevents material degradation.
- Temperature Limit: The recommended service temperature does not exceed 300°C to maintain structural integrity.
- Media Compatibility: Media compatibility must be verified before installation to avoid corrosion or fouling.
- Cleaning Methods: Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures based on the process medium.
- Handling Precautions: The porous surface must be protected from crushing and contamination during handling and storage.
- Machining Capabilities: Cutting, welding, and basic machining are permitted for assembly integration while preserving the porous structure.
How does the 110 PPI pore density relate to the 30 µm filtration rating for this sintered titanium foam sheet?
PPI and micron rating are independent parameters. The 110 PPI describes the cellular structure with approximately 0.23 mm cell spacing and 35–45% porosity, while the 30 µm value defines the filtration precision for particle capture. Both must be reviewed together when matching the sheet to an assembly, as PPI influences flow resistance and structural density, not the pore size that determines filtration cut-off.
What are the maximum service temperature and media compatibility constraints for this 30 µm titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility must be verified per application because titanium provides corrosion resistance but is not universally inert to all chemicals, such as strong reducing acids or oxidizing agents. The sheet is intended for water treatment, chemical processing, pharmaceutical clarification, gas purification, and similar environments, but each process requires a review of operating pressure, temperature, and media compatibility before installation.
Can this sintered porous titanium sheet be machined or welded, and what cleaning methods are recommended?
Yes, the metallic construction supports cutting, welding, and basic machining for integration into assemblies, but care must be taken to avoid crushing or contaminating the porous surface. Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The sheet is also cleanable and reusable under compatible conditions.
This 30 µm, 110 PPI sintered titanium foam sheet (100×100×3 mm) combines corrosion resistance and thermal stability (≤300°C) with interconnected porous flow paths for low-resistance separation, though its porous structure is mechanically fragile and requires careful handling to avoid crushing.
Positive
- Controlled filtration with low flow resistance: The 30 µm filtration rating and 110 PPI cellular structure, with 35–45% porosity and 0.23 mm cell spacing, provide uniform pore distribution and interconnected pathways that enable stable separation while maintaining low flow resistance.
- Corrosion resistance and thermal tolerance: Titanium construction offers corrosion resistance in compatible media and a recommended service temperature up to 300°C, supporting use in harsh chemical, pharmaceutical, and thermal-management applications.
Trade-offs
- Mechanical fragility of porous structure: The porous surface must be protected from crushing and contamination during handling, installation, and cleaning, limiting mechanical loading and requiring careful integration into assemblies.
- Upper service temperature limit of 300°C: The recommended service temperature of ≤300°C restricts deployment in high-temperature filtration or catalytic processes, requiring verification of operating conditions before use.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
